ajsimmo wrote: ↑Yesterday, 20:00OC203. It's 102mm high, against 100mm for the Mann version, so would be worse.silverbullet wrote: Re: oil filter, iirc the one to use with the interwarmer is a Mahle OC 21 or 23, its a Fraud Mondeo 2.0 application but it fits and is serviceable.
Speed shop recommend a smaller filter (for a Polo) - Mann W712/52. It's only 92mm high, but the pressure relief valve spec is different, hence the BW alternative.
Sent from my moto g55 5G using Tapatalk
It is the threaded union the cooler and filter sits on that is the problem. I may not have seated it fully during engine rebuild. I spent best part of the afternoon looking (unsuccessfully) for another nut to lock up against the retaining nut hoping to wind it in further. Then I contemplated cutting about 3mm off the end of the union thread with a cutting disc.
Silly idea!