Club 80-90 Forums

Brilliant thank you

Changing from mechanical to electric fuel pump on my t25 Pumps mounted in front of tank I would like to mount the changeover relay iwithin the engine compartment Inside the small plastic junction box LH side of bulkhead Any reason I can’t take 12v switched feed from the coil (fused at 3amp) Would ke...

Owned my t25 for 17 years converted to day van shortly after purchasing and used ever since
On the logbook it still has minibus and when you go dvla says 12 seater
I would like to change logbook to 5 seats as that’s all it’s got
But what do I put under body type
It’s a 84 twin slider caravelle
Cheers

anyone got swivel bases drivers side that can rotate 180 degrees !
can only get mine to 90 before it fouls steering wheel tried with it forward and back but no good
any help please

just gone to the bus and it wont start
no spark
power to coil but not reading anything across terminals
is this the right coil http://www.justkampers.com/shop/ignitio ... 10538.html" onclick="window.open(this.href);return false;
i have the electronic set up no points
cheers fellers

thats excellent news will have another look

cheers

have evrything i need now but:
cant see where the diesel bars mount to chassis, is this something i need to drill or weld captive nuts to or are they there and im just looking in the wrong place
its a 84 petrol velle by the way

yep bolt is a throwback from the good old beetle days the d shaped head helps foul against the casting so you can tighten or undo from one side (engine side)
god i mis my beetle you could fit it in a garage and work in the warm

2k requires an airfed mask as mentioned also wear latex gloves cover skin etc, isocyanates in the hardener are nasty and still present even when the paint has cured so wear a dust mask as well when sanding. a lot of bodyshops use rollers i think it helps cut down their voc and as said primer is flat...

Ive been trawling the breakers all day got some golf and passat ones which look perfect for the job but: i have an 84 van and appear to have no holes/ paper blanks covering holes on my doors inside the ducting. if there are any there and ive missed them i would buy the proper ones but if i'm drillin...

need a warm day!!!!!! rubber will split and crack if you attempt it while cold, also takes some guts and a couple of people outside ready when it pops out!!! washing line works a treat covered in talk inside groove to put back. dont use washing up licquide to lubricate rubbers

happens pulling away but also if you just rev the engine, best way i can describe it is a rumbling sort of vibration coming from the engine that happens at certain revs, changed the clutch recently spigot bearing looked ok (would this cause a noise) just a bit gutted as it seams to be one thing afte...

as funds are tight i recently welded up the exhaust on my bus it all works a treat but now it's not so noisey i can hear a rumble! but only at certain revs now a bit worried, have had lots of gnarley Aircooled vw's and this sounds the same as main bearing rumble,there is no end float and the oil pre...

i sharpen my own i,m tight as i use alot of drills at work
if you have access to a bench grinder its not to difficult by hand just practice on large drill bits first and wear goggles!

right just got in.... skinned knuckles missed dubfreeze but beer is helping the j tube style thing on the drivers side of the bus had cracked last summer and as we are planning a lot of camping trips this year i thought it a good idea to fix/replace. think vw must have had a lot of bits and pieces l...