petrol to diesel mounting bars

[Frostbus]

have evrything i need now but:
cant see where the diesel bars mount to chassis, is this something i need to drill or weld captive nuts to or are they there and im just looking in the wrong place
its a 84 petrol velle by the way

[Plasticman]

Can I take it that you have the tubular steel bars for the oiler?
if soi then there should be tapped (captive nuts) on the rear panal either side of the no plate flap, and oin the chassis there are plates with the required holes and use a pair of nuts and bolts or if your posh bolts and nuts..
mike

[Frostbus]

thats excellent news will have another look

cheers

[Plasticman]

This is one of the rear panal ones, I have added a plate as you can see as my replacement backpanal was off an ac,
http://i42.photobucket.com/albums/e308/ ... G_3511.jpg" onclick="window.open(this.href);return false;
http://i42.photobucket.com/albums/e308/ ... G_3516.jpg" onclick="window.open(this.href);return false;
If you can be arsed searching the thread there will be a picky of ther other end of the mounting, or somebody else may have a picky they can do for you
mike