sorry another 2.1 problem
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 15
- Joined: 20 Dec 2005, 20:58
- 80-90 Mem No: 11873
- Location: merseyside
sorry another 2.1 problem
local guy bought a german t25 westy 2.1 auto
running on 3
changed plugs dizzy rotor oil , filters
runs on 4 now
but revs up and down .had spare air flo meter and still the same.
checked manifolds for leaks with spraying wd40 on all intake lines and just the same.
any ideas...and timing at tdc.
running on 3
changed plugs dizzy rotor oil , filters
runs on 4 now
but revs up and down .had spare air flo meter and still the same.
checked manifolds for leaks with spraying wd40 on all intake lines and just the same.
any ideas...and timing at tdc.
rust of course its got rust 

- Aidan
- Trader
- Posts: 7071
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: sorry another 2.1 problem
idle control system
DJ or MV ?
DJ or MV ?
Last edited by Aidan on 12 Apr 2011, 17:38, edited 1 time in total.
- Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: sorry another 2.1 problem
Aidan wrote:idle control system

The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
-
- Registered user
- Posts: 15
- Joined: 20 Dec 2005, 20:58
- 80-90 Mem No: 11873
- Location: merseyside
Re: sorry another 2.1 problem
where would i look for the idle control system ?
rust of course its got rust 

- Aidan
- Trader
- Posts: 7071
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: sorry another 2.1 problem
get a copy of Bentley manual and follow the procedures, MV is fully covered in that, or download Vanagon Solving Driveability Issues manual off the internet, simple enough generally to diagnose but you need to know what's what especially on a new purchase cause p.o. could well have bodged it to get it running and flogged on
-
- Registered user
- Posts: 15
- Joined: 20 Dec 2005, 20:58
- 80-90 Mem No: 11873
- Location: merseyside
Re: sorry another 2.1 problem
did compression test and 3 cylinders showing 120 bar one cylinder showing 0 to 15 bar .....erm 

rust of course its got rust 

- Aidan
- Trader
- Posts: 7071
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: sorry another 2.1 problem
so rocker cover off and see what's what on that cylinder valvewise
Re: sorry another 2.1 problem
Yup, could be valve clearances/ hydr tappets up swanney? Could be valve burnt, or rings. Unlikely rings at that low pressure so maybe just head/off on as Aidan says, take a quuik looksee
The 80-90 Tech Wikipedia Your 1st port of call

1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
-
- Registered user
- Posts: 15
- Joined: 20 Dec 2005, 20:58
- 80-90 Mem No: 11873
- Location: merseyside
Re: sorry another 2.1 problem
Ok
Took rocker cover off to find adjusting screw off one of the rocker arms just lying in the. Cover and a locking nut half way down another pushrod tube.
Its destroyed end of push rod and the hydraulic valve lifter come out in bits. Next question. Anyone got a hydraulic valve lifter and pushrod for sale. 2.1 mv auto
Took rocker cover off to find adjusting screw off one of the rocker arms just lying in the. Cover and a locking nut half way down another pushrod tube.
Its destroyed end of push rod and the hydraulic valve lifter come out in bits. Next question. Anyone got a hydraulic valve lifter and pushrod for sale. 2.1 mv auto

rust of course its got rust 

Re: sorry another 2.1 problem
Post in WANTED
The 80-90 Tech Wikipedia Your 1st port of call

1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1