SLIDING DOOR HANDLE how do you get the lock out?
Moderators: User administrators, Moderators
-
"WEAZLECHIN"
- Registered user
- Posts: 233
- Joined: 13 Jan 2006, 09:58
- 80-90 Mem No: 0
- Location: j9 m6. you know, traffic jam..
SLIDING DOOR HANDLE how do you get the lock out?
i need to alter a door lock to suit my key, but i cant see how you get the tumbler out in the first place. anyone else know???
-
Syncro G
- Registered user
- Posts: 239
- Joined: 21 Mar 2007, 19:15
- 80-90 Mem No: 3988
- Location: Peak District
Theres a grub screw at the bottem or top of the handle on the fattest diamiter where it sits in the door. It'll probubly look completely invisable but try scraping/digging/cleaning around that part of the handle and you'll find it eventully. Once unscrewed the cylinder will slide out - put a key in or it'll fly to peices as removed.
On assembly don't fully tighten the grubscrew or the cylinder won't turn - just screw it in enough and use a small blob of loctite to stop it rattleing out - not enough to gum up the lock!
On assembly don't fully tighten the grubscrew or the cylinder won't turn - just screw it in enough and use a small blob of loctite to stop it rattleing out - not enough to gum up the lock!
Glen Syncronaut: 113 - 1992 JX Syncro pannel van
-
"WEAZLECHIN"
- Registered user
- Posts: 233
- Joined: 13 Jan 2006, 09:58
- 80-90 Mem No: 0
- Location: j9 m6. you know, traffic jam..
