Water hose reducer

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
glenn77
Registered user
Posts: 71
Joined: 29 Oct 2005, 20:57
80-90 Mem No: 1646
Location: Guisborough,Cleveland

Water hose reducer

Post by glenn77 »

Does anyone know where i can get hold of a rubber water hose reducer with 32mm at one end and 38mm at the other so i can join old metal 32mm long water pipe to new 38mm plastic replacement pipes ????

User avatar
CovKid
Trader
Posts: 8411
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Post by CovKid »

Theres a prob. If it were me, and I'm not absolutely sure it would work, is find a hose somehere in between and force one end on, and tighten the other end down with a jubilee clip? Sounds a bit barbaric but otherwise try a hose specialist and see what they can come up with.

syncrosimon
Registered user
Posts: 570
Joined: 29 Jan 2007, 00:50
80-90 Mem No: 3784
Location: Blackdown Hills of Devon and Somerset
Contact:

Post by syncrosimon »

these people might be able to help.

http://www.venairsport.co.uk/index.php?cPath=42
1991 16" DJ (sold)
2006 Subaru Outback 3.0R
2010 Yamaha Ténéré
2000 KTM LC400

glenn77
Registered user
Posts: 71
Joined: 29 Oct 2005, 20:57
80-90 Mem No: 1646
Location: Guisborough,Cleveland

Post by glenn77 »

Thanks guys - managed to get some silicon reducers direct from a manufacturer for £3.75 +vat each - saved a packet by searching around - now for the hose clips.... :D

User avatar
ermie571
Registered user
Posts: 4970
Joined: 11 Oct 2005, 11:11
80-90 Mem No: 2129
Location: Minster-on-Sea, Kent: Member 2129 07784052288

Post by ermie571 »

Glenn - please post that manufacturer's name!!! As I could do with some too....mine currently is the atrocity aforementioned by Cov kid.....the right hoses for the plastic pipe, with an arrangment of Tube and clip to reduce it to the old system :(

The properjobbies would be brill!

Em
x
2.1 DJ 1990 Caravelle (died and gone to heaven)
2.0 AGG (1997 ish) 1984 transporter LPG

User avatar
Bilbo Blue
Registered user
Posts: 34
Joined: 05 Sep 2006, 09:52
80-90 Mem No: 2867
Location: Bridgwater, Somerset.

Post by Bilbo Blue »

I got mine from www.demon-tweeks.co.uk
Blue.

1990, G reg, JX 1600TD, Bilbo Arragon hightop conversion.
A camper, a longboard and waves - what more is needed?

glenn77
Registered user
Posts: 71
Joined: 29 Oct 2005, 20:57
80-90 Mem No: 1646
Location: Guisborough,Cleveland

Post by glenn77 »

got mine from here

http://www.hoseworld.com/acatalog/SILIC ... UCERS.html

under the silicon reducers section.
Total cost for 4 with vat and p+p was £25

sorted - if youre going to do a job do it properly and you wont have to do it again - hope this helps :D

User avatar
ermie571
Registered user
Posts: 4970
Joined: 11 Oct 2005, 11:11
80-90 Mem No: 2129
Location: Minster-on-Sea, Kent: Member 2129 07784052288

Post by ermie571 »

It surely will - thanks! Perhaps you could stick some piccies up of the finished thing? taa

Em
x

(ps -
mods - does this need a wiki link???)
2.1 DJ 1990 Caravelle (died and gone to heaven)
2.0 AGG (1997 ish) 1984 transporter LPG

glenn77
Registered user
Posts: 71
Joined: 29 Oct 2005, 20:57
80-90 Mem No: 1646
Location: Guisborough,Cleveland

Post by glenn77 »

i will try - i just have to spend a few more days under the van when the bits arrive - oh what fun

User avatar
ermie571
Registered user
Posts: 4970
Joined: 11 Oct 2005, 11:11
80-90 Mem No: 2129
Location: Minster-on-Sea, Kent: Member 2129 07784052288

Post by ermie571 »

glenn77 wrote:i will try - i just have to spend a few more days under the van when the bits arrive - oh what fun

ummm know that feeling well!

Good luck
Em
x
2.1 DJ 1990 Caravelle (died and gone to heaven)
2.0 AGG (1997 ish) 1984 transporter LPG

Locked