Water hose reducer
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 71
- Joined: 29 Oct 2005, 20:57
- 80-90 Mem No: 1646
- Location: Guisborough,Cleveland
Water hose reducer
Does anyone know where i can get hold of a rubber water hose reducer with 32mm at one end and 38mm at the other so i can join old metal 32mm long water pipe to new 38mm plastic replacement pipes ????
-
- Registered user
- Posts: 570
- Joined: 29 Jan 2007, 00:50
- 80-90 Mem No: 3784
- Location: Blackdown Hills of Devon and Somerset
- Contact:
- ermie571
- Registered user
- Posts: 4970
- Joined: 11 Oct 2005, 11:11
- 80-90 Mem No: 2129
- Location: Minster-on-Sea, Kent: Member 2129 07784052288
Glenn - please post that manufacturer's name!!! As I could do with some too....mine currently is the atrocity aforementioned by Cov kid.....the right hoses for the plastic pipe, with an arrangment of Tube and clip to reduce it to the old system
The properjobbies would be brill!
Em
x

The properjobbies would be brill!
Em
x
2.1 DJ 1990 Caravelle (died and gone to heaven)
2.0 AGG (1997 ish) 1984 transporter LPG
2.0 AGG (1997 ish) 1984 transporter LPG
- Bilbo Blue
- Registered user
- Posts: 34
- Joined: 05 Sep 2006, 09:52
- 80-90 Mem No: 2867
- Location: Bridgwater, Somerset.
I got mine from www.demon-tweeks.co.uk
Blue.
1990, G reg, JX 1600TD, Bilbo Arragon hightop conversion.
A camper, a longboard and waves - what more is needed?
1990, G reg, JX 1600TD, Bilbo Arragon hightop conversion.
A camper, a longboard and waves - what more is needed?
-
- Registered user
- Posts: 71
- Joined: 29 Oct 2005, 20:57
- 80-90 Mem No: 1646
- Location: Guisborough,Cleveland
got mine from here
http://www.hoseworld.com/acatalog/SILIC ... UCERS.html
under the silicon reducers section.
Total cost for 4 with vat and p+p was £25
sorted - if youre going to do a job do it properly and you wont have to do it again - hope this helps
http://www.hoseworld.com/acatalog/SILIC ... UCERS.html
under the silicon reducers section.
Total cost for 4 with vat and p+p was £25
sorted - if youre going to do a job do it properly and you wont have to do it again - hope this helps
