wheel hubs nuts

[hercules]

HI could any one till me which way the back wheel hub nuts trun ?? to get off
thanks for any help
chris

[Grun]

hercules,

They turn anticlockwise to loosen, but are VERY tight. As much as 500NM or 370 lbs/ft
Mike

[hercules]

hercules,

They turn anticlockwise to loosen, but are VERY tight. As much as 500NM or 370 lbs/ft
Mike

oh that sound very Tight ok thanks

[Grun]

hercules,

You will need a 3/4 inch drive 46mm socket and bar with a length of scaffold tube or similar, or.......

https://club8090.co.uk/wiki/Ge ... ut_spanner

to undo and a big torque wrench to refit correctly.

Mike

[kevtherev]

or a scaffold pole and a fat bloke

[Mr Bean]

hercules,

You will need a 3/4 inch drive 46mm socket and bar with a length of scaffold tube or similar, or.......

https://club8090.co.uk/wiki/Ge ... ut_spanner

to undo and a big torque wrench to refit correctly.

Mike

I don't have a big one! So I work out where to stand on the scafold pole to achieve the correct torque. But I have to go on to converter thingy on the internet to turn my 13 Stone at X feet into theem foriegn units.
Cheers
ken

[hercules]

or a scaffold pole and a fat bloke

iv got a fat bloke coming tuesday and pol to do them, just need to buy the 46mm to put on the nut to undo it, thanks for any one that help

[Grun]

iv got a fat bloke coming tuesday

And you have a PM waiting for you Monday

Mike