Hob Rack (boring but very useful!)

Post by **leftfield27** » 22 Jun 2008, 13:03

Hi, I am getting ready to go away camping for a while, and I dont have a rack for my hob. Last year I ended up using a tiny camping stove, but seeing as I have 2 hobs it seems a bit silly!
The hob is below; (hope this works i haven't uploaded/linked a photo before)

Any ideas what to do to get a rack on here? The two holes are exactly 20cm apart and the gas jet thing is about 35mm tall (if i remember correctly.... any suggestions?

thanks

Duncan/Leftfield27

Post by **leftfield27** » 22 Jun 2008, 13:07

i did check the faq, but it didnt work the first time, if it doesnt work this time could someone explain please how add a photo to a post?

Post by **Mocki** » 22 Jun 2008, 13:38

the trouble is you have linked to the page your pictures are displayed on, NOT the picture, so you need to get the picture properties, and link to them..........
i have edited your top post to show you, if you also click E D I T, you will see what i did........

Post by **leftfield27** » 22 Jun 2008, 17:26

Eventually with the help of preview post and a bit of fiddling, I've got it, thanks Mocki.

Still, anyone got any suggestions for how to get something to use as a hob rack?

Post by **DiscoDave** » 22 Jun 2008, 20:26

how about a BBQ rack, grille thing, bent to fit it? or swap the cooker out for something that will fit in the hole but is complete with grille!

try ebay for a start! i've seen plenty of that type of hob in it!

Post by **Stefvan** » 22 Jun 2008, 22:04

try looking around under the hob with a torch to see if there is anything with a manufacturers name on it. Then you have somewhere to start looking. Even better a model. Sometimes you might find a sticker in the cupboards underneath. A name like Cramer, Spinflo, Smev, ?? Then call up or email some caravan breakers. Thats how I got a replacement pan stand for my van. I got the model number and emailed pictures and dimensions.
http://www.knowsley-caravans.co.uk/caravan_breakers.htm

Stefvan