Gennie Prob

[SYNCRO]

I've got Briggs and Stratton Gennie (only run 5-6hrs)

Went to use it the other day after filling with fresh petrol (filtered through chamois leather just in case!!) It ran OK for a couple of minutes then began to hunt (slow down then speed up to normal)

Looked in the user manual but no fault diagnosis for this

Anyone any ideas what fault I may have??

Kev

[Rozzo]

try re-applying the choke slightly and see if it clears. if so it could be a slightly blocked jet

[SYNCRO]

Cheers Rozzo

Doesn't appear to work will try the jet approach

Kev

[DiscoDave]

i had a little genny that did that! worked fine just noisy!

[Fritz]

If you give us the model/type and output rating , we be able to be a bit more specific as to a quick fix.


Regards

Fritz,,,,,,,,,,,,

[SYNCRO]

If you give us the model/type and output rating , we be able to be a bit more specific as to a quick fix.
Regards
Fritz,,,,,,,,,,,,

Hi Fritz

Its a BSQ1000

Generator
Max AC output 850VA

Engine
maximum power output is 1.8kw / 4000min

Any good ????

Kev

[Fritz]

Hi ya,,,,,It would be one of those;;;;

[img:200:200]http://www.power4motorhomes.co.uk/suitc ... q_1000.gif[/img]

Not the simplest of things to work on due the compact nature of the beast.

If you can get to the carb without to much buggering about it may just need to be removed and given a good blow through.

If it cures the problem remember in future, if you are not going to use the genny for a few weeks is to run the carb dry (by turning fuel off and allowing the genny to run till it stops) .

Regards

Fritz,,,,,,,,,,

[SYNCRO]

That's the beasty!!

Will try to get to carb then and give it a quick blow....

Thanks for info on stopping it

Kev