Hi,
Hoping someone can help.
I got up on a ladder to clean up the hightop on my van today (first real chance Ive had). On getting round the back and looking from above I noticed that with the tailgate shut there is huge gap between it and the end of the roof. am guessing that this is not normal.
Is the fit adjustable? Its possible that it has been put this way deliberately when the high top was fitted but water must be getting in and I so it must be going somewhere, probably bad. The back end of my van has particular issues with rust, perhaps this is the cause. Any advise greatfully received.
cheers
Stephen
tailgate fit
Moderators: User administrators, Moderators
tailgate fit
Rust never sleeps.
- Mocki
- Membership Admin
- Posts: 17258
- Joined: 29 Sep 2005, 09:27
- 80-90 Mem No: 428
- Location: Mansfield Notts
- Contact:
if the gap is about 1/2 an inch, its normal, and correct, the water runs down the guttering and out the bottom of the door closure, by design, on the outside of the rubber seal........ check your seal if you are getting water in......
Steve
tel / txt O7947-137911

________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Auto Caravelle TS TinTop Camper
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Auto Caravelle TS TinTop Camper