Hello,
I have an 84 5 speed t25 1.9DG. I ordered the extension as I found it a little to far for me to reach. Only noticed yesterday there are two sizes. M12 & M14. I heard they changed to M14 in 85 but strangely enough to my 84 seems to fit the M14 if my wife is correct (I'm away) would have thought it would have been an M12?
The extension comes with a nut?
Does this nut go between the original gearstick and the extension I'm not sure?
The other thing is the wife says it does not bend to the rear of the van but sideways?
Do I space out with a washer so it points the right way?
Thanks lee
Extension gearstick
Moderators: User administrators, Moderators
-
jamesakers
- Registered user
- Posts: 237
- Joined: 20 Apr 2015, 14:26
- 80-90 Mem No: 14421
- Location: Manchester
Re: Extension gearstick
There was a crossover year so maybe that's why you have a 14mm stick.
Put the nut on first, screw the extension on and get it pointing the way you want then unscrew the nut so it meets the extension and locks it in place.
Put the nut on first, screw the extension on and get it pointing the way you want then unscrew the nut so it meets the extension and locks it in place.
Sir Adventure - 1991 Autosleeper Trooper 1.9DG Petrol
https://vwt25.blog/
https://vwt25.blog/
-
dave friday
- Registered user
- Posts: 804
- Joined: 15 Oct 2006, 11:19
- 80-90 Mem No: 5533
- Location: rambler de oria, near albox,almeria,spain
Re: Extension gearstick
Screw the nut onto the gear-lever then screw the extension onto the gear-lever,position the extension where you want it and tighten the nut against the extension ( to stop it moving about!)
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]
Re: Extension gearstick
Great thanks Guys...
Lee
Lee