JX Turbo torque settings

Post by **carthago ian** » 10 May 2016, 13:32

I had to remove the turbo on my JX, can't find the correct torque settings for the 4 bolts; I have a Bently manual that only gives me the settings for the exhaust manifold . Need to crack on with this as my holidays are early June .. Cheers

Post by **clift_d** » 10 May 2016, 14:18

The manual says:

45Nm
Coat thread and head contact surface with G 00500

I think the G 00500 might be some type of Copaslip high temperature grease? I'm sure somebody with a bit more knowledge will be along soon to confirm.

Post by **ZsZ** » 10 May 2016, 14:27

45Nm and have to lube the thread and head with some high temp copper paste
Page 74:
http://vwt3.hu/files/egyeb/Dieselmotor_ ... -JX-KY.pdf" onclick="window.open(this.href);return false;

E D I T: I was typing slowly

Post by **carthago ian** » 10 May 2016, 14:36

Lads Thanks very much !!! good tip re copper paste on thread

Club 80-90 Forums