fitting lap belts

[garry247]

I am fitting a 3 point seatbelt and a lap belt this weekend.

I have ordered the seatbelt repair plates from Brickwerks. one for the rear pillar (Ex panel van) and two for behind the seat. (i will be getting them spot welded in)

I have also ordered the reel version of the lap belt. My question is that i have two holes in the center just up from the bottom under my 3/4 rnr seat. Not at the top like in the WIKI

(https://club8090.co.uk/wiki/In ... oint_belts" onclick="window.open(this.href);return false;)


I was going to use one for my 3 point belt and the other for the lap belt. my question is where do i fit the lap belt reel?

Once this is fitted i will put up here with instructions for others.

cheers.

[silverbullet]

There are two seatbelt anchor points in the firewall behind the seat, so there will be another pair toward the end of the bench, nearest your cupboard unit. Each has 2 tapped bosses to accept 7/16" UNF seatbelt bolts. They are NOT metric

[Simon Baxter]

We have a pile of seatbelt mountings here for the rear seatbelts, direct copies of the originals so they will rivet in place exactly where VW intended.
I just need some time to do some instructions.