The glass is already obsolete from VW Aidan. They are not the same kind of mirror you find on syncro arms either. No heated glass on ebay just standard convex glass
I used to fold them in all the time but then they started to wear on the bottom mount of the arm and it caused them to flop in when driving in really strong winds. I removed them and noticed the edge on the bottom mount joint was wearing away with constant folding (after just 6 months) so I had to swap the arms over to compensate. Since then I've never wound them in again.
E D I T: Just dismantled the mirror and managed to get the broken glass off the heated element so I should be able to get some non-heated glass and stick it on the back
EDIT2: Like this
LINK
EDIT3: Can anyone recommend something to stick the heating element to the mirror with? obviously the heating element still needs to get through. Would double sided tape suffice as I have some of that and it's quite thin??
