Hi all
What are best to look for when considering changing the front seats.
I have rover coupe ones in my t4, but want something for the T3
lots of pictures around, but what are they from
What suits you, and what fits best ??
Ta !!
I've been hanging my nose over Saab seats on eBay as they apparently are a good fit.
Annoyingly my neighbour has some X5 seats but they are too high because of all the electrics and heating etc, so basically your circulation will be cut off by the steering wheel.
Any seats need to be as low to the floor as possible apparently.
I am however no expert, so I will follow this thread eagerly!
I have the theory that any seat will fit within reason even the x5 ones. Cut the runners off or the bits you don't need and fabricate them in. Job done
Live life Then you die! Thats no ETHOS but its TRUE!!
I have MR2 seats in my van not to much work to fit them and £40 for a good pair of ebay
I havent driven my van for over a month now, drove it for the first time today and I have to say I'd forgotten how comfy the seats are, Im a lanky 6'2 and theres plenty of room for my kness under the steering wheel.
James
If Pac-Man affected us as kids, we'd all be running around in darkened rooms, munching magic pills and listening to repetitive electronic music
I have just fitted a pair of Saab in my van, very comfortable and would recommend!!!
They were only fifty quite on ebay though they were slightly wider than my original ones. Unfortunately, the sliding rails were not the same. The driver seat was straight forward to fit, I cut the rails down and managed to adapt. However, the passenger side was a bit more tricky, for this I did have to have a bracket made...
I have a pair of Alpha Romeo Gtv Phase 1 Leather seats, they look awesome. But wont work with swivels, I removed the van runners, and used the Apha runners.
This is making interesting reading
Don't mind messing a bit, and always liked the look of the saab seats, so think maybe this route
Thanks chaps and chapesses
I've have put Leather Saab 9-5 seats into my t4 and t25 and i've got to say they are fantastic.
Just had to re-drill 2 holes on each seat.
Your better off visiting breakers yards as the seats are fetching alot of money on ebay due to us van owners.