I'm not new to the forum having previously owned an 82 Aircooled Joker. I've recently purchased a 1990 Westy Atlantic...

I've overhauled the suspension amongst other things. I've fitted AVO shocks and 50mm springs and replaced all the bushes with powerflex items. I'm now at the point of getting the alignment set at my local garage. However a previous owner has fitted Mercedes alloys, 7.5 x 16 et41 with 215/65r16 tyres on the rear and 215/55r16 tyres up front and 10mm spacers all round. I think the wheels look great but I'm concerned at the amount of clearance between the front tyres and upper wishbones. There is approx 5mm clearance. Should I be concerned?


I like the alloys and the tyres have a decent amount of tread. I have considered swapping the 10mm spacers for 15mm to increase the clearance but I'm concerned this would push the tyre outside the wheel arch. I've also thought about sourcing some VW Carat alloys but these seem fairly hard to get hold of and expensive when they do, plus the cost of fitting new tyres and wheel studs etc.

I'm interested in the thoughts of those on the forum. My previous van had standard wheels and this is my first experience of a vehicle with modified wheels. As much as I like the Merc alloys I'd like the van to be safe. Am i worrying unnecessarily?
Thanks
Myles

