What is this radiator?

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
Xenolith05
Registered user
Posts: 6
Joined: 10 Aug 2026, 07:34
80-90 Mem No: 0

What is this radiator?

Post by Xenolith05 »

Hi all, 
I have a 04/1985 T25 with 2.1DJ WBX on a Pierburg Carburettor. It may have had an engine swap at some point before my ownership, possibly 1.9DG.
I drained the coolant so that I could flush, fill, and bleed the system because I think it has incorrect antifreeze in it and may have a ‘dalek’ cap problem.
The radiator bleed screw is a 13mm bolt head, and it looks like someone has over tightened it previously, causing it to turn the captive nut inside.
i’m confused because I thought that the T25 radiators with plastic sides and aluminium core normally come in two sizes, 34mm and 42mm. The one I’ve taken out which has a VW Audi stamp on it, has a 64mm core measured across from the front of the fins to the back of the fins. The fan cowling, plugs, inlets and outlets etc. are all in the correct places.
Does any one know anything about this size core? Is it standard? 

Thanks for any info…


 

silverbullet
Trader
Posts: 17901
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: What is this radiator?

Post by silverbullet »

More info needed. RHD or LHD? Imported vehicle? Could be a hot climate special part but I have no access to ETKA/ETOS to do a deep dive.
1985 Oettinger 3.2 wbx-6 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 alloys,
"Schrödinger's syncro"
Syncronaut #156

Xenolith05
Registered user
Posts: 6
Joined: 10 Aug 2026, 07:34
80-90 Mem No: 0

Re: What is this radiator?

Post by Xenolith05 »

Sorry Silverbullet, wasn’t notified that you had replied.
It is a UK spec RHD, not imported. I have been told that it might have been a limited run by VW to go in their models fitted with AC but VW then changed to the standard and Hot Climate cores to save money through less materials.
Thanks

User avatar
maxstu
Registered user
Posts: 5359
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Re: What is this radiator?

Post by maxstu »

My DG1900 auto had a very thick core radiator. Does it have a strengthener bar in the middle? I seem to recall it's core was much thicker than 42mm.
Last edited by maxstu on 06 Nov 2026, 20:18, edited 1 time in total.
MaxStu
1987 2.1 Automatic Carb/LPG Autosleeper.
"Blissfully happy in your presence".

silverbullet
Trader
Posts: 17901
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: What is this radiator?

Post by silverbullet »

The original rad on my RHD 85 DG syncro had a bar across it and half height, however the finning in the bottom third was well rotted out and it went to scrap without a second thought.
1985 Oettinger 3.2 wbx-6 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 alloys,
"Schrödinger's syncro"
Syncronaut #156

Post Reply