Insulation Inside Panels.

Thin bits of metal and bright blue light. Including glass & trim.

Moderators: User administrators, Moderators

Post Reply
User avatar
maxstu
Registered user
Posts: 5307
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Insulation Inside Panels.

Post by maxstu »

I've posted here as the camper section has little activity over the last five years.

What's the general consensus for rock wool packed against intervals of bodywork? Some say it hold moisture and rots internally. Others' say it is fine.

I bought this camper two years ago. All the cavities for doors and hatch are filled this way. There are no signs of internal or external rust on any four opening panels.

I thought about fixing radiator insulation to panels using heavy duty carpet glue, then repack with rock wool.

Image

Image

Regards
Stuart
MaxStu
1987 2.1 Automatic Carb/LPG Autosleeper.
"Blissfully happy in your presence".

User avatar
mioba
Registered user
Posts: 547
Joined: 10 Jul 2009, 11:48
80-90 Mem No: 7850
Location: Nottingham

Re: Insulation Inside Panels.

Post by mioba »

Its been there for 40 years ..... Dont worry

I done my van 4 years ago. Close cell foil foam then insulation from b and a (made from plastic). The noise reduction and insulation is stunning
Westfalia Hightop Top Joker 1.6TD - aka Daisy, my labour of love

User avatar
maxstu
Registered user
Posts: 5307
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Re: Insulation Inside Panels.

Post by maxstu »

Thanks for your answer.
I can't be certain this is the original insulation. There's a bit of foil insulation either side which leads to believe it is a recent replacement.
That's partly my concern. But it all feels bone dry.
MaxStu
1987 2.1 Automatic Carb/LPG Autosleeper.
"Blissfully happy in your presence".

User avatar
mioba
Registered user
Posts: 547
Joined: 10 Jul 2009, 11:48
80-90 Mem No: 7850
Location: Nottingham

Re: Insulation Inside Panels.

Post by mioba »

Mine had the same itchy stuff there.

It will be original.
Westfalia Hightop Top Joker 1.6TD - aka Daisy, my labour of love

User avatar
maxstu
Registered user
Posts: 5307
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Re: Insulation Inside Panels.

Post by maxstu »

mioba wrote: 28 Aug 2026, 17:58 Mine had the same itchy stuff there.

It will be original.


:ok
MaxStu
1987 2.1 Automatic Carb/LPG Autosleeper.
"Blissfully happy in your presence".

Stesaw
Registered user
Posts: 2306
Joined: 10 Aug 2019, 23:30
80-90 Mem No: 17004
Location: Coventry

Re: Insulation Inside Panels.

Post by Stesaw »

Rockwool holds water stu, when I stripped the LT it had that in it and it was like a waterlogged sponge,
I'd get the recycled plastic loft insulation its very good for heat holding doesnt hold water.
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0 CH Westy project
1986 LT 2.4 D24T Reimo

User avatar
maxstu
Registered user
Posts: 5307
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Re: Insulation Inside Panels.

Post by maxstu »

Stesaw wrote: 28 Aug 2026, 21:03 Rockwool holds water stu, when I stripped the LT it had that in it and it was like a waterlogged sponge,
I'd get the recycled plastic loft insulation its very good for heat holding doesnt hold water.

Okay and thanks. But online there seems to be differing views. Some say don't use. Some say it is okay.

Thanks.
MaxStu
1987 2.1 Automatic Carb/LPG Autosleeper.
"Blissfully happy in your presence".

Stesaw
Registered user
Posts: 2306
Joined: 10 Aug 2019, 23:30
80-90 Mem No: 17004
Location: Coventry

Re: Insulation Inside Panels.

Post by Stesaw »

I suppose as long as it stays dry its fine, im glad i swapped to the plastic stuff as it doesn't itch :lol:  and it seems to hold heat better.
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0 CH Westy project
1986 LT 2.4 D24T Reimo

User avatar
maxstu
Registered user
Posts: 5307
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Re: Insulation Inside Panels.

Post by maxstu »

Stesaw wrote: Yesterday, 13:59 I suppose as long as it stays dry its fine, im glad i swapped to the plastic stuff as it doesn't itch :lol:  and it seems to hold heat better.

:ok
MaxStu
1987 2.1 Automatic Carb/LPG Autosleeper.
"Blissfully happy in your presence".

simonmarsh
Registered user
Posts: 80
Joined: 30 Jun 2020, 09:50
80-90 Mem No: 15712
Location: Near Bristol

Re: Insulation Inside Panels.

Post by simonmarsh »

Could I please ask what the recycled plastic product is called and where you can get it from?
do you insulate inside the doors too? I assume so? I have a 1980 Devon moonraker and not sure if it’s insulated 
thanks for your help 
1980 2 litre CU petrol engine 4 speed gearbox (Devon Moonraker)
1973 1303S Beetle
1965 Karmann Ghia coupe

User avatar
R0B
Moderator
Posts: 19863
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: Insulation Inside Panels.

Post by R0B »

Google recycled plastic insulation. Many places sell it.
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

User avatar
maxstu
Registered user
Posts: 5307
Joined: 07 Feb 2008, 01:05
80-90 Mem No: 3946
Location: Margate

Re: Insulation Inside Panels.

Post by maxstu »

simonmarsh wrote: Yesterday, 18:46 Could I please ask what the recycled plastic product is called and where you can get it from?
do you insulate inside the doors too? I assume so? I have a 1980 Devon moonraker and not sure if it’s insulated 
thanks for your help 

Insulate everywhere that is safe to do so. Under cab mats, doors, rear hatch, side panels. If there's an internal card you can release, do so and check behind.
It does make a difference.
MaxStu
1987 2.1 Automatic Carb/LPG Autosleeper.
"Blissfully happy in your presence".

User avatar
mioba
Registered user
Posts: 547
Joined: 10 Jul 2009, 11:48
80-90 Mem No: 7850
Location: Nottingham

Re: Insulation Inside Panels.

Post by mioba »

Got my plastic recycled roll from B and Q IIRC. Diall its called.

The foil backed closed foam i got online.

The foil backed sticks on obviously as its adhesive. Then contact spray and then the plastic recycled stuff.

You wont get the insulation in the front doors because of the window. But the closed cell foam you will - the doors close with a clunk.

I insulated every panel of van. It was hard work as its a westy. So had to remove everything.

It is well worth it.
Westfalia Hightop Top Joker 1.6TD - aka Daisy, my labour of love

Post Reply