Hi
Has anyone installed one of these (or like it) in their bus? It came without sensors but the fact sheet has some resistance figures
https://ebay.us/m/QGIPdc
Any information would be most helpful.
Thanks
Rob
Led 3-in-1 digital display temp/volts/oil pressure
Moderators: User administrators, Moderators
-
lowtimeppl
- Registered user
- Posts: 25
- Joined: 10 Sep 2007, 23:23
- 80-90 Mem No: 13529
- Location: Halstead, Essex
-
The Hairy Camper
- Registered user
- Posts: 426
- Joined: 03 May 2017, 00:19
- 80-90 Mem No: 16820
- Location: Cheshire
Re: Led 3-in-1 digital display temp/volts/oil pressure
More than likely not compatible with a T3.
I don't believe any T3's (definitely not Diesels) came with a factory Oil Pressure sensor, so you would need to buy/fit an after market one and run a wire to the engine bay.
Voltage could probably be wired in, but an aftermarket temperature sensor would probably need to be installed to send a reading to this gauge. Our 40 year old temperature sensor technology is not likely to communicate with this modern gauge unfortunately.
I don't believe any T3's (definitely not Diesels) came with a factory Oil Pressure sensor, so you would need to buy/fit an after market one and run a wire to the engine bay.
Voltage could probably be wired in, but an aftermarket temperature sensor would probably need to be installed to send a reading to this gauge. Our 40 year old temperature sensor technology is not likely to communicate with this modern gauge unfortunately.
1984 Autosleeper, pop-top, 1.9 1Y, 5-Speed