Help identifying this carburettor please

[filiphiruta]

Hello, can someone please help me identifying this carburettor, its from my 84’ 1.9 DG water cooled van.

I have doubts because the markings on it say pierburg 2E, i was wondering, is there a simple 2E?

Is it not 2E3 or 2E2? How can I determine that, thanks.

Here is a video and a photo of the carb im talking about.

https://imgur.com/gallery/carburettor-5QsJcUZ

[maxstu]

Can't see anything? The video or photos are blank... to me that is.

2E then nearby a serial number just above, on the upper body off your carb, should start 025, identifies the correct model. Then letter/s at end.

Hope this helps

[filiphiruta]

Can't see anything? The video or photos are blank... to me that is.

2E then nearby a serial number just above, on the upper body off your carb, should start 025, identifies the correct model. Then letter/s at end.

Hope this helps

This is the serial number photo



Sent from my iPhone using Tapatalk

[maxstu]

That's the one. T25/T3 automatic carb.

[filiphiruta]

That's the one. T25/T3 automatic carb.

I know but i was wondering whether its a 2E a 2E2 or a 2E3 because i need to buy a rebuild kit and brickwerks only has one for 2E3 carb, do you think that will fit?


Sent from my iPhone using Tapatalk

[maxstu]

It will fit. But you need to work out which accelerator pump you need. 19mm comes with kit. 13mm is extra.
1984 van normally have 13mm, if original, l think?

[filiphiruta]

It will fit. But you need to work out which accelerator pump you need. 19mm comes with kit. 13mm is extra.
1984 van normally have 13mm, if original, l think?

Usually yes, i think this one has 19 mm, thanks for your response


Sent from my iPhone using Tapatalk

[maxstu]