Oil pressure light.

[BarnyE]

Is there a way to check my oil system is doing what it should be doing?

I only ask as my oil pressure light is now illuminating. Comes on with ignition, briefly goes off when starting then comes back and stays on. It’s a 1y engine and I did not do the conversion myself. The dipstick says it’s got oil, but don’t 100% trust the converters home made dipstick.

Anything I can do to check oil is flowing?
I will order a new pressure switch, and do an oil and filter change, putting in the correct amount of oil and seeing if it is correct on the dipstick.

What oil should I use?

Many thanks


Sent from my iPhone using Tapatalk

[syncroandy]

Also:
https://club8090.co.uk/wiki/All_engine_ ... and_causes
https://club8090.co.uk/wiki/All_engine_ ... ecommended

[BarnyE]

So my question about if there is anyway of testing oil is flowing as it should is “no”.
Not without an oil pressure guage, which I don’t have.


Sent from my iPhone using Tapatalk

[Rascal]

Where are you. I have one you can borrow

[BarnyE]

In Ireland.

[Rascal]

Oh.. Im actually in ireland right now.. But leaving today... I saw a bluestar in Dery yesterday

[BarnyE]

Fortunately a new pressure switch fixed the issue, always plan for the worst and hope for the best worked out in this case!


Sent from my iPhone using Tapatalk