Front offside suspension mounting

Big lumps of metals and spanners. Including servicing and fluids.

Moderators: User administrators, Moderators

Post Reply
Marky Mark
Posts: 1
Joined: 02 Aug 2024, 12:23
80-90 Mem No: 0

Front offside suspension mounting

Post by Marky Mark »

My 1985 T25 camper has just failed MOT on excessive movement on the top suspension wishbone mounting.
My mechanic had previously replaced the bushes and through bolt. It seems there is wear on the mounting point which is part of the chassis. Does anyone have experience of this and is there a fix? Eg Insert sleeve!
Top
User avatar
ZsZ
Registered user
Posts: 1538
Joined: 12 Feb 2009, 16:28
80-90 Mem No: 14899
Location: Budapest, Hungary
Contact:
Contact ZsZ

Re: Front offside suspension mounting

Post by ZsZ »

The excentric washers (#10 on pic) should keep the bolt in position.
Image
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
Top
davidoft1
Trader
Posts: 2878
Joined: 27 May 2009, 18:56
80-90 Mem No: 16628
Location: hayling island

Re: Front offside suspension mounting

Post by davidoft1 »

I would check the bolts properly tight
Top
User avatar
Aidan
Trader
Posts: 6992
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:
Contact Aidan

Re: Front offside suspension mounting

Post by Aidan »

and the eccentric washers are available in different thicknesses
Top
dazzerT251900td
Registered user
Posts: 39
Joined: 20 Jun 2010, 16:42

Re: Front offside suspension mounting

Post by dazzerT251900td »

Hi there.
Just done this job myself.
I would think all the weight is on the eccentric washes.
Make sure the top wishbone bushes have been spot welded after being pressed in.
Make sure the long through bolt is tight.
Hope you solve it.Good luck.
Top
Post Reply

Return to “Mechanical”