Jx not starting after install

[Oldiebut goodie]

NO switch instead of NC? As to why you might have 2 wronguns ........

[jaber]

What’s is NC?

[Oldiebut goodie]

Normally open/normally closed.

[jaber]

Cheers, although still not understanding, engine was a runner with one of the switches and the other came from another runner both jxtd
How do i rectify this problem?

Steve

[ajsimmo]

JX has two switches, low (NC) and high (NO). Sounds like you have somehow swapped the wires, or fitted two high, normally open switches. From memory, the blue/black wire goes to low switch at back of head, yellow wire to high switch on filter housing.
And you're welcome on the bulb trick

Sent from my ONEPLUS A3003 using Tapatalk

[jaber]

You sir are a star, I think I may have the wrong switch in the head will take a look shortly

Steve