Tried to fill up today and it's simply pouring out of the bottom and have no washers

Before I start undoing things it would be a great help if I knew what to undo and where.
Thank you peeps
Moderators: User administrators, Moderators
Ralf85 wrote:It's directly attached to the filler pipe. To get at it you need to get under the van and remove the front wheel and it's just above.
Ralf85 wrote:The spare wheel underneath. The bottle is just above it.
Ralf, thank you for all your help, if it's above the spare wheel what is the tank just above and inside the near side wheel? That's under the filler cap? And does the washer bottle have an overflow?Ralf85 wrote:The spare wheel underneath. The bottle is just above it.
Oldiebut goodie wrote:That is the washer bottle! Favourite for no washers is the switch getting gummed up. Is the horn still working?
Oldiebut goodie wrote:Horn is just an aside as he may have been messing with the steering column wiring.
The switch is on the steering column at the end of the arm. I think that your model year may well have the blower and wash/wipe on the same fuse, check to see if you still have the heater blower working first, if not check the fuse.
Oldiebut goodie wrote:The motor is earthed on the chassis next to the bottle - check to see that the wire (brown)is still attached there. Check the blower and fuse.
Sleedale wrote:Oldiebut goodie wrote:The motor is earthed on the chassis next to the bottle - check to see that the wire (brown)is still attached there. Check the blower and fuse.
Off to check the wire.......