cu top speed 35mph
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 63
- Joined: 22 Dec 2012, 20:41
- 80-90 Mem No: 11884
- Location: Basingstoke
Re: cu top speed 35mph
Appreciate the help. Will get out there again tomorrow hopefully. So change the timing to 5 after top dead centre too.
1982 cu Aircooled high top
Re: cu top speed 35mph
presume with foot to the floor , throttle is open fully?
-
- Registered user
- Posts: 63
- Joined: 22 Dec 2012, 20:41
- 80-90 Mem No: 11884
- Location: Basingstoke
Re: cu top speed 35mph
hi all, just a quick update..
took it to a garage, he had a quick once over and has noticed that i have an air leak on the right hand side manifold..oops not sure how i missed that but i did, but also he says the choke area has a leak and also around spindle area, does this make sense to anyone??
been recommended to replace the carbs for new as im on a time frame, holiday in few weeks using the bus . whats the best etc?? new carbs or refurb again recommendations??
cheers
p.s on a good note he said the work ive done looked good and was amazed it was running as it was..
took it to a garage, he had a quick once over and has noticed that i have an air leak on the right hand side manifold..oops not sure how i missed that but i did, but also he says the choke area has a leak and also around spindle area, does this make sense to anyone??
been recommended to replace the carbs for new as im on a time frame, holiday in few weeks using the bus . whats the best etc?? new carbs or refurb again recommendations??
cheers
p.s on a good note he said the work ive done looked good and was amazed it was running as it was..
1982 cu Aircooled high top
- 937carrera
- Registered user
- Posts: 3599
- Joined: 05 Apr 2015, 19:29
- 80-90 Mem No: 16333
- Location: N Yorks.
Re: cu top speed 35mph
Thanks for the update, it's always good to hear how things are turning out.
I understand the comment about the wear on the spindles, this does happen, it can be fixed, but I don't understand the comment about a leak in the choke area.
I believe the verdict on new carbs is that they aren't as good as a set of refurbed original carbs. Others on here will have more experience with them than me so I hope they'll be along soon. If the air leak on the right hand side is fixed, then does that make it useable, even though it may not be perfect ? You can then get the carbs done when there isn't such time pressure
I understand the comment about the wear on the spindles, this does happen, it can be fixed, but I don't understand the comment about a leak in the choke area.
I believe the verdict on new carbs is that they aren't as good as a set of refurbed original carbs. Others on here will have more experience with them than me so I hope they'll be along soon. If the air leak on the right hand side is fixed, then does that make it useable, even though it may not be perfect ? You can then get the carbs done when there isn't such time pressure
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine
Re: cu top speed 35mph
air leak from choke area?
remove the choke elements and the housing screws are usually loose
try moving the choke housing , its common for these to move - they shouldn't!
remove the choke elements and the housing screws are usually loose
try moving the choke housing , its common for these to move - they shouldn't!
-
- Registered user
- Posts: 63
- Joined: 22 Dec 2012, 20:41
- 80-90 Mem No: 11884
- Location: Basingstoke
Re: cu top speed 35mph
im glad we have the same thoughts, ive asked for timing to be checked, valves set and also pesky oil seals on push rods, i never got round to it and as they will have it open makes sense in my head, there changing the carb manifold gaskets too, he did say hes seen the leak there (chokes) before and is easy fix. does anyone know the cost of getting carbs rebuilt as i have a spare set in garage that i could send away, as long as he can get my power back and it running okay it will do for the holiday...then save to get carbs refurbed and set up...
i got a good vibe from the guys at the garage so im hopeful
i got a good vibe from the guys at the garage so im hopeful
1982 cu Aircooled high top
-
- Registered user
- Posts: 63
- Joined: 22 Dec 2012, 20:41
- 80-90 Mem No: 11884
- Location: Basingstoke
Re: cu top speed 35mph
had a change of heart were now going for twin dells. cant wait
1982 cu Aircooled high top