Temp Gauge.

[royndenise369]

Hi all, Just fitted a later engine and water system to my 84 Joker. How do I wire the single temp gauge wire to the new double pin one in the housing?
Many thanks.

[123-jn]

one pin goes to earth, check if either pin have continuity with the main body of the sender using a multimeter, the other one goes to the single lead. If neither pin seems to be connected to the main body then wire one to earth the other to the single wire.

[royndenise369]

Hi, Many thanks. I had wired it that way but thought I must be wrong. Just done some tracing and found the earth broken inside the rubber on plug.
Once again Cheers.