1.8 or 2.0 gti ?
Moderators: User administrators, Moderators
1.8 or 2.0 gti ?
hi.
im thinking about changing my diesel engine for a petrol lump.
was thinking about a gti lump.
i would probably preffer the 2.0 over the 1.8 but what is the performance bettween the two engines?
is there much difference?
i gather the 2.0 litre engine is taller so therefore a bit harder to fit ?
so is it worth the effort over the 1.8 ?
also what sort of fuel consumption would i be looking at?
any advice appreciated
thanks
john
im thinking about changing my diesel engine for a petrol lump.
was thinking about a gti lump.
i would probably preffer the 2.0 over the 1.8 but what is the performance bettween the two engines?
is there much difference?
i gather the 2.0 litre engine is taller so therefore a bit harder to fit ?
so is it worth the effort over the 1.8 ?
also what sort of fuel consumption would i be looking at?
any advice appreciated
thanks
john
1981 vw Kombi 1.6d fitted with 1.9d AEF engine.
Kent.
Kent.
Re: 1.8 or 2.0 gti ?
2l every time.
Makes negligible amount of more torque BUT it is made at substantially lower rpm ( peak torque is at something like 2500 or 2600 whereas the 1.8 is at 3500 or 3600)
Smaller inlet manifold and drops in no issues whereas PB engine has huge inlet manifold, they are not interchangeable due to injectors.
AAG has a bit more wiring but if you can do an engine swap and can read and write your own name then you can read the wiring diagram ok, it's no great shakes.
Makes negligible amount of more torque BUT it is made at substantially lower rpm ( peak torque is at something like 2500 or 2600 whereas the 1.8 is at 3500 or 3600)
Smaller inlet manifold and drops in no issues whereas PB engine has huge inlet manifold, they are not interchangeable due to injectors.
AAG has a bit more wiring but if you can do an engine swap and can read and write your own name then you can read the wiring diagram ok, it's no great shakes.
Re: 1.8 or 2.0 gti ?
Thanks Elvis.
So is the AAG 2.0 the engine to look for ?
thanks
John
So is the AAG 2.0 the engine to look for ?
thanks
John
1981 vw Kombi 1.6d fitted with 1.9d AEF engine.
Kent.
Kent.
Re: 1.8 or 2.0 gti ?
AGG is the one chap
- Titus A Duxass
- Registered user
- Posts: 5778
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
-
- Registered user
- Posts: 1352
- Joined: 23 Oct 2005, 19:15
- 80-90 Mem No: 0
- Location: Nottinghamshire
Re: 1.8 or 2.0 gti ?
As an AGG convert I have to agree. I've owned numerous 1.8 GTI's over the years and having driven a friends van (1.8 2wd tintop) back to back with mine (2.0 Syncro hightop) there is a noticable difference in the overall power delivery.
'90 Syncro Hightop. Ex-BUPA/Rowan ambulance with 2.0L GTI power and some curious windows.
)
Re: 1.8 or 2.0 gti ?
ok thanks.
do i need any electrical bits from the cars loom such as the ecu etc, ?
thanks
john
do i need any electrical bits from the cars loom such as the ecu etc, ?
thanks
john
1981 vw Kombi 1.6d fitted with 1.9d AEF engine.
Kent.
Kent.
Re: 1.8 or 2.0 gti ?
Ecu, engine loom - start pulling the whole thing out intact the dissect it once out, immobiliser, key,hf ring , complete engine including inlet tract for maf , etc
-
- Registered user
- Posts: 34
- Joined: 30 Nov 2013, 18:19
- 80-90 Mem No: 13069
- Location: SE London
Re: 1.8 or 2.0 gti ?
Hiya all! I was going to start a new thread, but I'm hoping that my question kinda follows onto Dridgy's question (hiya there!). I'm replacing my 1.6d CS. I've found a 3H gearbox for sale, but it has no bell housing, does my CS fit (I know I'll have to get a 5 stick)? Also - I've found an AGG engine which is a beauty, sounds and feels tight and sharp, with low mileage, but it's an AC + Power steering version. Is this a real chore to remove? Only it looks like a donor from Valhalla. I hope you can offer some help.
Cheers,
Mark.
Cheers,
Mark.
- Aidan
- Trader
- Posts: 6589
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: 1.8 or 2.0 gti ?
Mark, yes the bellhousing from your existing box will fit the 3H
Re: 1.8 or 2.0 gti ?
Can ditch the PAS and AC. No problems. Either just take them off and use the golf bracket that holds the alternator or use the CS alternator stand.
Can't remember off the top off my head about which pulley you need to use for correct offset for belt Alignment but will be very obvious.
Check output on alternators, probably find the golf one is the better bet to keep for output
Can't remember off the top off my head about which pulley you need to use for correct offset for belt Alignment but will be very obvious.
Check output on alternators, probably find the golf one is the better bet to keep for output
-
- Registered user
- Posts: 34
- Joined: 30 Nov 2013, 18:19
- 80-90 Mem No: 13069
- Location: SE London
Re: 1.8 or 2.0 gti ?
Folks, as ever - thank you!