In need of a new VC
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 189
- Joined: 21 Nov 2009, 23:53
- 80-90 Mem No: 7622
- Location: Kent Coast
Re: In need of a new VC
Well done mate
Thats outed the 'Hocus Pocus' that exists around the subject.
I’ve always had the suspicion that most failures would be a case
of cooked oil.
Did you allow any particular amount of air inclusion, or just
go by the weight of oil between those two amounts?
Thats outed the 'Hocus Pocus' that exists around the subject.
I’ve always had the suspicion that most failures would be a case
of cooked oil.
Did you allow any particular amount of air inclusion, or just
go by the weight of oil between those two amounts?
- syncro up
- Registered user
- Posts: 212
- Joined: 09 Aug 2007, 18:57
- 80-90 Mem No: 3981
- Location: Scotland
Re: In need of a new VC
Whats the going rate for a replacement VC these days?
Life is like a roll of toilet paper
The closer it gets to the end, the faster it goes...
Todays might Oak is just yesterdays nut which held its ground!
'87 Rhd 2.1 Syncro Moonraker
'91 Rhd AAZ Syncro Sika
'03 Merlin Syncro Expedition Trailer
The closer it gets to the end, the faster it goes...
Todays might Oak is just yesterdays nut which held its ground!
'87 Rhd 2.1 Syncro Moonraker
'91 Rhd AAZ Syncro Sika
'03 Merlin Syncro Expedition Trailer
- hugomonkey
- Registered user
- Posts: 1033
- Joined: 26 Apr 2011, 05:29
- 80-90 Mem No: 10485
- Location: Denmark
Re: In need of a new VC
512 euros exchange from busschmeide, did´nt worry about the amount of air just the weight, i think mine had 283 grams and others had a bit more and a bit less, we cant tell the difference, cost me £40 to do mine so at the end of the day even if it doesn´t work you haven´t lost much and if you think about it most of the vc`s out there are contaminated with gearbox oil to some degree and they still work, maybe not as well as when it was new but i´ve never felt a new vc and probably never will, from what i hear from Aidan the quality of "proffesionally" refurbed VC´s has gone through the floor so its just a case of getting a few mates together and getting on with it
Regards Jason
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
- SyncroRich
- Registered user
- Posts: 80
- Joined: 25 Mar 2007, 19:01
- 80-90 Mem No: 5064
- Location: Southampton
Re: In need of a new VC
Hi Jason,
did you get your silicon oil from the same place as the seals?
Regards,
Rich
did you get your silicon oil from the same place as the seals?
Regards,
Rich

EJ25 Powered RHD Syncro ex Ambleside Mountain Rescue
- hugomonkey
- Registered user
- Posts: 1033
- Joined: 26 Apr 2011, 05:29
- 80-90 Mem No: 10485
- Location: Denmark
Re: In need of a new VC
a friend of ours sourced everything through IG 16 in germany as they had just done a load, im trying to get hold of a few sets as we speak should know more in a couple of weeks, the oil on dieselkontor.de is 100,000 viscosity which is way too agressive unless you have a decoupler and only use 4wd offroad, i used 60,000 and that suited me just fine, i think i heard talk of the originals being a mixture of 25,000 and 60,000
Regards Jason
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
-
- Registered user
- Posts: 879
- Joined: 25 May 2008, 09:41
- 80-90 Mem No: 10335
- Location: folkestone, kent
Re: In need of a new VC
rich- where are you on the south coast 

-
- Registered user
- Posts: 807
- Joined: 19 Jul 2010, 21:12
- 80-90 Mem No: 10610
- Location: Wiltshire
Re: In need of a new VC
What beer do you recommend ? 

Syncronaut no 152
92 RHD mv panel van
94 RHD jx doka 16"
92 RHD mv panel van
94 RHD jx doka 16"
- hugomonkey
- Registered user
- Posts: 1033
- Joined: 26 Apr 2011, 05:29
- 80-90 Mem No: 10485
- Location: Denmark
Re: In need of a new VC
tuborg but it has to be brewed in denmark, maybe it would be a good idea to try different brands and see if there is any diference 

Regards Jason
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=kHp3lQKS6lo" onclick="window.open(this.href);return false;
-
- Registered user
- Posts: 807
- Joined: 19 Jul 2010, 21:12
- 80-90 Mem No: 10610
- Location: Wiltshire
Re: In need of a new VC
I'll try becks and see how it goes !! 

Syncronaut no 152
92 RHD mv panel van
94 RHD jx doka 16"
92 RHD mv panel van
94 RHD jx doka 16"
-
- Trader
- Posts: 17210
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: In need of a new VC
I think it's time that the FlybyNight Club got it's act together once more and had a bit of a visco session. Atlantis is now grim to park on tarmac and I don't want to break anything.
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys
-
- Registered user
- Posts: 879
- Joined: 25 May 2008, 09:41
- 80-90 Mem No: 10335
- Location: folkestone, kent
Re: In need of a new VC
We need the seals everything else is in place
-
- Trader
- Posts: 17210
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: In need of a new VC
Excellent!
1985 Oettinger 3.2 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 period alloys
- SyncroRich
- Registered user
- Posts: 80
- Joined: 25 Mar 2007, 19:01
- 80-90 Mem No: 5064
- Location: Southampton
Re: In need of a new VC
Jes
Hythe but not your Hythe. Southampton.
Hythe but not your Hythe. Southampton.
EJ25 Powered RHD Syncro ex Ambleside Mountain Rescue
-
- Registered user
- Posts: 1931
- Joined: 21 Feb 2012, 21:47
- 80-90 Mem No: 0
- Location: lancaster uk
Re: In need of a new VC
Hmmm ex mountain rescue bus...interesting.
- SyncroRich
- Registered user
- Posts: 80
- Joined: 25 Mar 2007, 19:01
- 80-90 Mem No: 5064
- Location: Southampton
Re: In need of a new VC
[quote="max and caddy"]Hmmm ex mountain rescue bus...interesting.[/quote
You and my bus got history?
You and my bus got history?

EJ25 Powered RHD Syncro ex Ambleside Mountain Rescue