Instrument cluster replacement
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 8
- Joined: 06 Feb 2012, 14:56
- 80-90 Mem No: 10687
- Location: Peterborough
Instrument cluster replacement
Hello everyone, looking for some advise.
I have a 1990 petrol DG engine T25 camper, and I am looking for a replacement instrument cluster due to damage to the plastic housing, which I am going to try to temporarily fix, whilst sourcing a replacement.
My question is I noted that my cluster has a sticker with 3 part numbers on it, to get another one that I can simply swap over do I need to match all 3 part numbers or simply get one that has the same dials? ( I have the analogue clock with temp & fuel gauge)
Many thanks
Garry
I have a 1990 petrol DG engine T25 camper, and I am looking for a replacement instrument cluster due to damage to the plastic housing, which I am going to try to temporarily fix, whilst sourcing a replacement.
My question is I noted that my cluster has a sticker with 3 part numbers on it, to get another one that I can simply swap over do I need to match all 3 part numbers or simply get one that has the same dials? ( I have the analogue clock with temp & fuel gauge)
Many thanks
Garry
- Aidan
- Trader
- Posts: 7074
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Instrument cluster replacement
ideally you'd match the numbers but there are slight variations that might not matter
basically you are looking foir a petrol analogue clock set 1986MY on, but you could fit a non clock or a rev counter dash, as long as they are petrol and post 1986MY
I have a spare clockset (no speedo) I think it's analogue clock I'll check
basically you are looking foir a petrol analogue clock set 1986MY on, but you could fit a non clock or a rev counter dash, as long as they are petrol and post 1986MY
I have a spare clockset (no speedo) I think it's analogue clock I'll check
-
- Registered user
- Posts: 8
- Joined: 06 Feb 2012, 14:56
- 80-90 Mem No: 10687
- Location: Peterborough
Re: Instrument cluster replacement
Hi Aidan
Many thanks for the info, would be interested in what clock set you have as my speedo works fine, its just the housing that's the problem.
Garry
Many thanks for the info, would be interested in what clock set you have as my speedo works fine, its just the housing that's the problem.
Garry
Re: Instrument cluster replacement
Just checked ETOS and it lists the following available for £79.94+vat (ETKA may say differently but I don't have that)
251-919-053
instrument housing with
adjusting knob for clock and
opening for trip recorder
restting knob
251-919-053
instrument housing with
adjusting knob for clock and
opening for trip recorder
restting knob
-
- Registered user
- Posts: 8
- Joined: 06 Feb 2012, 14:56
- 80-90 Mem No: 10687
- Location: Peterborough
Re: Instrument cluster replacement
Hi
Does that mean I should be able to order a new Housing via my local VW main deal?
Many thanks
Garry
Does that mean I should be able to order a new Housing via my local VW main deal?
Many thanks
Garry
-
- Registered user
- Posts: 171
- Joined: 17 May 2012, 10:15
- 80-90 Mem No: 11124
- Location: South Birmingham
Re: Instrument cluster replacement
Cruz wrote:Just checked ETOS and it lists the following available for £79.94+vat (ETKA may say differently but I don't have that)
251-919-053
instrument housing with
adjusting knob for clock and
opening for trip recorder
restting knob
Do you have a link to this please?
Tin top C reg van to camper conversion. 1.9 golf tdi conversion.
Re: Instrument cluster replacement
when i bought my rev counter das pod i am shure it was over £100
Re: Instrument cluster replacement
No link. It's a desktop program.jocko wrote:Cruz wrote:Just checked ETOS and it lists the following available for £79.94+vat (ETKA may say differently but I don't have that)
251-919-053
instrument housing with
adjusting knob for clock and
opening for trip recorder
restting knob
Do you have a link to this please?
ring a vw commercial dealer and ask on the availability of the part
251-919-053 is a housing without the hole for the digital clock.
I expect ETOS to be wrong and the part to be obsolete though
Re: Instrument cluster replacement
if anyones intrested i have the rev counter dash binacle in excellent a 1 condition for sale, the only thing from standard it is drilled for a towbar warning light at top left hand corner
-
- Registered user
- Posts: 8
- Joined: 06 Feb 2012, 14:56
- 80-90 Mem No: 10687
- Location: Peterborough
Re: Instrument cluster replacement
Hi, managed to glue quiet a bit of mine back together over weekend with a couple of tubes of epoxy resin, But still looking for a good condition replacement, but would really like a like for like replacement if poss.
Managed to get the part numbers off mine 251 919 035 EQ
251 919 059 J
110.008/344/072
if anyone got anything?
Many thanks
Garry
Managed to get the part numbers off mine 251 919 035 EQ
251 919 059 J
110.008/344/072
if anyone got anything?
Many thanks
Garry
Re: Instrument cluster replacement
Post up some photos. front and back