5 Piece Spoiler refurb

[R0B]

Mine had gone a greyish colour.My neighbour showed me a handy little trick to get it back to black.He went over it with a heat gun.I now looks like brand new.

[Titus A Duxass]

I have heard of this trick but I've also heard that it's not a permanent fix.

Don't the parts "fade" back to the original look?

Please keep us informed Rob.

[R0B]

Apparently its not permanent mate.But doing it again in a few months is not a problem.

[Titus A Duxass]

If it's good for a few months it's worth doing.
Will give it a bash at the next opportunity.

[keith]

we used to use it when I worked in plastic moulding....heat gun and scotch brite pad...

polish, shine and restore the skinned effect.

we had blokes who were skilled at making a silk purse out of the proverbial sows ear

[Cruz]

I cleaned mine thouroughly then sprayed it matt satin black. Still black

[R0B]

Did mine again today so it does last a fair while.It was just beginning to lose It's colour.

[Titus A Duxass]

6 months plus - that's not bad.

[Wychall]

Mine needs a little bit more than cleaning. For some reason, a previous owner has converted it to a 7 piece by sawing the two main bits in half. It also has gaps as if they tried to shorten it .

So, advice please. How do I best repair it. I guess plastic welding, but I don't really want to spend large wads on a special welder. Would a hot air gun do it?

Also, any ideas as to what material it is, as I guess I will need to source filler rods of the appropriate similar material.

Thanking you in advance for your valued advice.

[Titus A Duxass]

Buy new bits, single pieces can be got from eBay.de

[Wychall]

Buy new bits, single pieces can be got from eBay.de

That sounds like the defeatist route! I like to take a challenge.

[Titus A Duxass]

Fair play.