Thought THIS might be why 1st/2nd are sometimes hard to get. Any advice folks?
Dale
Is this relay lever too loose? (4 speed gearbox)
Moderators: User administrators, Moderators
-
dalewheeler1
- Registered user
- Posts: 0
- Joined: 24 Mar 2013, 14:02
- 80-90 Mem No: 0
Is this relay lever too loose? (4 speed gearbox)
1987 twinslider tintop, 4 speed manual, 1.9DG (broken) currently being replaced with scooby lump
-
Oldiebut goodie
- Registered user
- Posts: 7502
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Is this relay lever too loose? (4 speed gearbox)
Link to 31Mb video - spammer?
I am not going to open it!
I am not going to open it!
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
Aidan
- Trader
- Posts: 7124
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Is this relay lever too loose? (4 speed gearbox)
I have cases bored and sleeved if more than a 1.5mm total play
there is often play in shaft/lever join too, none allowed
there is often play in shaft/lever join too, none allowed
-
dalewheeler1
- Registered user
- Posts: 0
- Joined: 24 Mar 2013, 14:02
- 80-90 Mem No: 0
Re: Is this relay lever too loose? (4 speed gearbox)
Cheers Aidan, i was rather hoping you would reply
I think I can get some sleeves knocked up at work. Will check the other joints too...
Dale
(sorry about the video size. I'll reduce it next time)
I think I can get some sleeves knocked up at work. Will check the other joints too...
Dale
(sorry about the video size. I'll reduce it next time)