Hi,
At the end of the pipe which goes from the crankcase breather to the air filter assembly is an insert about two inches long, wires plug into it. There is a restriction hole on one side - does this restriction face the breather or the air box?
I took it out when I removed the disintegrating old hose but have no idea which way around it was!
Thanks if you can help me with this one,
Alex
2.1 engine breather pipe (insert)
Moderators: User administrators, Moderators
- Aidan
- Trader
- Posts: 7124
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: 2.1 engine breather pipe (insert)
restricted end to air intake rubber hose
Re: 2.1 engine breather pipe (insert)
Thanks Aidan, I appreciate your help.
Alex
Alex