new flywheel??

[crump167]

Does anyone know where I can buy a new flywheel for me 1.9dg, cant find one anywhere

[Plasticman]

are dg/df the same ?
mm

[crump167]

Not sure, can you get df ones then?

[Ian Hulley]

Not sure, can you get df ones then?

DF are 215mm diameter along with early DG, late(r) DG and 2.1 DJ/SS/MV are 228 mm.

Ian

[billy739]

they are actually mixed.

you just need to know the clutch size as above 215 or 228, but it dosent matter if your buying a new clutch as well.

they also do ones with the ring gear either cast into the flywheel ( poss 2.0 Aircooled) and ones with a seperate ring gear. but they all seem to fit df, dg , dj , cu

you may not find a 'new ' one . whats wrong with yours ? i may have a good used 228?

[crump167]

Mine is a 228, keeps tearing the face off the oil seal, after 3 times and much research came to conclusion needed to get flywheel re faced, after getting quotes thought might aswell buy a new one

[Aidan]

no longer available in europe new so a good used one is as good as it gets

[crump167]

Thanks, looks like a trip to the machine shop.

[max and caddy]

Mine is a 228, keeps tearing the face off the oil seal, after 3 times and much research came to conclusion needed to get flywheel re faced, after getting quotes thought might aswell buy a new one

Don't quite understand how the face of the flywheel will tear the oil seal....

[crump167]

I dont get it either, the lip comes away from the outer ring, cant explain any better

[Aidan]

if the seal surface of the flywheel is damaged then I'd be looking at a SpeediSleeve solution rather than machining as the seal is only available in one size - are you using genuine seal or aftermarket, and how much end float have you got ?

[crump167]

Checked end float is good, not sure what a sleeve is, be grateful for more info, ta

[Plasticman]

love to see a picky of this bit
mm

[crump167]

Will put pic on asap mate, might help sort out whats going on with it

[Plasticman]

yes also the seal insitu and maybe out as well and the old ones you kept?
mm