mechanical help please. Clutch problem abroad
Moderators: User administrators, Moderators
- Shem
- Registered user
- Posts: 79
- Joined: 05 Jul 2012, 10:56
- 80-90 Mem No: 0
- Location: Wales and France
- Contact:
mechanical help please. Clutch problem abroad
Hi all.
French travles 1000 miles in, and have just stopped to see my folks...luckily!
Drving home, and as I released the clutch peddle, I felt it go hard underneath my foot. I managed to drive the approx 8 miles home. (Managed to to rough gear changes a couple of times, and a coupel of near stalls on round abouts.
SO Im no mechanic but my thoughts are....Gear box hopefully ok as it drove fine.
....Clutch plates ok as it wasnt loosing power at all?
Could it be a clutch cable or mechanism from the peddle?
Ive had a look underneath but am no mechanic, is it a cable clutch on t25s or Hydraulic? I cant see hydraulics anywhere
Any advice would be much appreciated.
We have break down cover so will call them shortly to hopefully get her lifted to a garage and fixed.
Thanks in advance
Shem
French travles 1000 miles in, and have just stopped to see my folks...luckily!
Drving home, and as I released the clutch peddle, I felt it go hard underneath my foot. I managed to drive the approx 8 miles home. (Managed to to rough gear changes a couple of times, and a coupel of near stalls on round abouts.
SO Im no mechanic but my thoughts are....Gear box hopefully ok as it drove fine.
....Clutch plates ok as it wasnt loosing power at all?
Could it be a clutch cable or mechanism from the peddle?
Ive had a look underneath but am no mechanic, is it a cable clutch on t25s or Hydraulic? I cant see hydraulics anywhere
Any advice would be much appreciated.
We have break down cover so will call them shortly to hopefully get her lifted to a garage and fixed.
Thanks in advance
Shem
Re: mechanical help please. Clutch problem abroad
The clutch is hydraulic not on a cable, could it be the slave cylinder?
1y Tin top rust collector.
- Shem
- Registered user
- Posts: 79
- Joined: 05 Jul 2012, 10:56
- 80-90 Mem No: 0
- Location: Wales and France
- Contact:
Re: mechanical help please. Clutch problem abroad
Hi...and thanks. With that in mind, Im thinking YES it could well be.
Would that explain the clutch peddle becoming stiff feeling?
Thanks again
Would that explain the clutch peddle becoming stiff feeling?
Thanks again
Re: mechanical help please. Clutch problem abroad
Check the reservoir under the instrument cowl it is the same one as the brakes.
1y Tin top rust collector.
-
- Registered user
- Posts: 332
- Joined: 24 Jan 2008, 17:40
- 80-90 Mem No: 4672
- Location: Ipswich
Re: mechanical help please. Clutch problem abroad
Just a thought but there is, as far as I can remember, may be wrong, a short shaft between the slave cylinder and clutch actuator arm. Possibly the shaft has worn a hole in the actuator arm OR the little shft has "fell out" This would allow the slave cylinder to go full travel giving a hard high pedal but not disengaging the clutch. You can clearly see the clutch slave and clutch release arm as you look at the engine it is to the rear on the left hand side. Good luck.
Pete Abbott
- pocolow
- Registered user
- Posts: 3654
- Joined: 09 Jan 2009, 19:38
- 80-90 Mem No: 6300
- Location: Macclesfield, Cheshire
Re: mechanical help please. Clutch problem abroad
What year is your van as the early ones did have cables and later ones hydraulics. Is it all gears or just some you can't get?
Mark
Mark

thecampervanman.blogspot.co.uk/
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
- Nicola&Tony
- Registered user
- Posts: 2674
- Joined: 01 Nov 2006, 18:18
- 80-90 Mem No: 3095
- Location: Wallsend, Tyne & Wear
Re: mechanical help please. Clutch problem abroad
Shem wrote:Any advice would be much appreciated.
What year is your van? Try the tech forum rather than general chat.
Tony
Looking for: window apertures for side windows, at the back of the van
T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!
LT31; 1993; RHD; 2.4L petrol; high-top; diy camper project.
T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!
LT31; 1993; RHD; 2.4L petrol; high-top; diy camper project.
- Shem
- Registered user
- Posts: 79
- Joined: 05 Jul 2012, 10:56
- 80-90 Mem No: 0
- Location: Wales and France
- Contact:
Re: mechanical help please. Clutch problem abroad
Hi, it s a 1989, so a late one, guessing Hydro.
thanks again for the advice Im going to go back out and take a look now in a sec. At least I can attempt to pass any advice on the French mechanic! somehow!
thanks again for the advice Im going to go back out and take a look now in a sec. At least I can attempt to pass any advice on the French mechanic! somehow!
- Nicola&Tony
- Registered user
- Posts: 2674
- Joined: 01 Nov 2006, 18:18
- 80-90 Mem No: 3095
- Location: Wallsend, Tyne & Wear
Re: mechanical help please. Clutch problem abroad
yep, you've got a hydraulic clutch.
Looking for: window apertures for side windows, at the back of the van
T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!
LT31; 1993; RHD; 2.4L petrol; high-top; diy camper project.
T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!
LT31; 1993; RHD; 2.4L petrol; high-top; diy camper project.
-
- Registered user
- Posts: 221
- Joined: 08 May 2011, 20:15
- 80-90 Mem No: 9673
- Location: Sarran, Correze, France
Re: mechanical help please. Clutch problem abroad
Where in France are you?
Be wary of VW main dealers, they're worse than useless.
Embrayage is clutch.
Embrayage a opération hydraulique would be a hydraulically operated clutch.
Be wary of VW main dealers, they're worse than useless.
Embrayage is clutch.
Embrayage a opération hydraulique would be a hydraulically operated clutch.
- Shem
- Registered user
- Posts: 79
- Joined: 05 Jul 2012, 10:56
- 80-90 Mem No: 0
- Location: Wales and France
- Contact:
Re: mechanical help please. Clutch problem abroad
thank you!
Were near Royan, we where about to leave for Lacanau, but the RAC are sending recovery tomorrow morning, so hoping it will be a quick and good fix, when they find whats wrong. Gagin to get back on the road already!
Were near Royan, we where about to leave for Lacanau, but the RAC are sending recovery tomorrow morning, so hoping it will be a quick and good fix, when they find whats wrong. Gagin to get back on the road already!