Cheers Mark
Should I replace the CV Joints &Gearbox mount?
Moderators: User administrators, Moderators
-
pocolow
- Registered user
- Posts: 3654
- Joined: 09 Jan 2009, 19:38
- 80-90 Mem No: 6300
- Location: Macclesfield, Cheshire
Should I replace the CV Joints &Gearbox mount?
In a few weeks my local garage will be dropping the Gearbox out of my Van so I can get Aidan to do a rebuild for me. The van has done 112000 miles and as far as I can see the CV joints are original. Three of the joints appear ok (no leaks) and one is leaking slightly (inner). Should I have them replaced whilst the box is off or keep the originals(no apparent knocking/rumbling)...They're not cheap (£62 each at Brickwerks)...any advice would be greatly appreciated.
Cheers Mark
Cheers Mark
Last edited by pocolow on 09 May 2012, 17:49, edited 1 time in total.
thecampervanman.blogspot.co.uk/
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
-
Titus A Duxass
- Registered user
- Posts: 5777
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: Should I replace the CV Joints??
I was in the same position a couple of weeks back.
I left them be - if it ain't broke don't fix it.
Although if one is weeping/leaking I'd replace the boot and regrease.
I left them be - if it ain't broke don't fix it.
Although if one is weeping/leaking I'd replace the boot and regrease.
VW T3 GTi Camper 2,0l
Re: Should I replace the CV Joints??
If it was me and i could afford it.I would change them.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
pocolow
- Registered user
- Posts: 3654
- Joined: 09 Jan 2009, 19:38
- 80-90 Mem No: 6300
- Location: Macclesfield, Cheshire
Re: Should I replace the CV Joints??
Hmm...its the afford it which is the problem £250 for four CV joints is painful,especially when you add all the other bits likely to need replacing tooR0B wrote:If it was me and i could afford it.I would change them.
Mark
thecampervanman.blogspot.co.uk/
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
Re: Should I replace the CV Joints??
Well mark.In that case you have practically answered your own question 
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
PetenAli
- Registered user
- Posts: 653
- Joined: 24 Jul 2010, 13:06
- 80-90 Mem No: 8569
- Location: West Cornwall
Re: Should I replace the CV Joints??
If they are originals and not got any play in them would it be worth stripping them down, giving them a good clean, check for any tell tale signs of wear and then refit them with new grease, boots etc? There's lots on here about newer CV's not being up to the original VW standards and I think Aidan himself has posted recently about using second hand originals in preference to new pattern parts. It would also be a much cheaper option if they are good on inspection. You also want to get the leaking one sorted asap or it will quickly start to wear.
Just a thought...
Just a thought...
1987 Westy Syncro 2.5 DJ (Courtesy of 025MOTORSPORT)
Syncronaut #171
Syncronaut #171
-
pocolow
- Registered user
- Posts: 3654
- Joined: 09 Jan 2009, 19:38
- 80-90 Mem No: 6300
- Location: Macclesfield, Cheshire
Re: Should I replace the CV Joints &Gearbox mount?
Thanks for the advice so far Guys 
..Just had a look under the van at the Gearbox mounting plate and as you can see the rubber bush is mullered and a previous owned has cable tied a bit of rubber pipe in it 
Any suggestions on how to fix this as I don't think they're available any more ..or am I wrong.??
Mark
..Just had a look under the van at the Gearbox mounting plate and as you can see the rubber bush is mullered and a previous owned has cable tied a bit of rubber pipe in it Any suggestions on how to fix this as I don't think they're available any more ..or am I wrong.??Mark
thecampervanman.blogspot.co.uk/
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
-
Oldiebut goodie
- Registered user
- Posts: 7515
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Should I replace the CV Joints &Gearbox mount?
I got a suitably sized engine mount cheap off Ebay for around a fiver, cut it off it's mount and welded it to the bracket - job done. Obviously you need to be careful with your welding but it can be done. Only trouble is I cannot remember what vehicle the engine mount was from.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
Re: Should I replace the CV Joints &Gearbox mount?
You could do with under-sealing your van mark. 
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
pocolow
- Registered user
- Posts: 3654
- Joined: 09 Jan 2009, 19:38
- 80-90 Mem No: 6300
- Location: Macclesfield, Cheshire
Re: Should I replace the CV Joints &Gearbox mount?
R0B wrote:You could do with under-sealing your van mark.
Cheek Rob
..I'll be coming around your house and whipping of your gearbox mount if you're not careful ...Ps can you buy the rubber bush for these?Mark
thecampervanman.blogspot.co.uk/
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
-
pocolow
- Registered user
- Posts: 3654
- Joined: 09 Jan 2009, 19:38
- 80-90 Mem No: 6300
- Location: Macclesfield, Cheshire
Re: Should I replace the CV Joints &Gearbox mount?
[quote="nevill3"]Have you seen these...
http://www.ebay.co.uk/itm/POWERFLEX-GEA ... 058wt_1185[/quote
Interesting ...how doe one go about fitting them?? anybody done this mod?
http://www.ebay.co.uk/itm/POWERFLEX-GEA ... 058wt_1185[/quote
Interesting ...how doe one go about fitting them?? anybody done this mod?
thecampervanman.blogspot.co.uk/
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
http://twitter.com/#!/Pocolow" onclick="window.open(this.href);return false;
Re: Should I replace the CV Joints &Gearbox mount?
Have a word with aidan.You never know.He might have a previously loved one knocking about.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
Re: Should I replace the CV Joints &Gearbox mount?
That link does say for petrol vans.Petrol are different to oil burners.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
nevill3
- Registered user
- Posts: 996
- Joined: 26 Nov 2009, 16:59
- 80-90 Mem No: 8062
- Location: UK Lake District, Early 1.6D CS now 4 speed gearbox
- Contact:
Re: Should I replace the CV Joints &Gearbox mount?
Here's another image of the bushes I linked to...from the poweflex website, they look relatively simple to fit.....altough not done one myself so what would I know!! 
http://www.powerflexonline.com/v/vspfil ... 1015-2.jpg
http://www.powerflexonline.com/v/vspfil ... 1015-2.jpg
