brake bleed screw size
Moderators: User administrators, Moderators
-
dave lfc
- Registered user
- Posts: 372
- Joined: 27 Nov 2010, 12:14
- 80-90 Mem No: 9021
- Location: liverpool
brake bleed screw size
just been bleeding my brakes and came to the last one and the bleed screw sheared off.what size bleed screws does my t25 take and where can i get one and how can i get the rest of this bleed screw out,cheers dave
its better to burn out than to fade away 1.9 dg petrol transporter1988
Re: brake bleed screw size
Same happened to me, you might be lucky and get it out using a stud extractor. There about £5 from local motor factor. Size wise i'm sure thats in the wiki
Jonno
Jonno
"Philosophers have only interpreted the world, the point is to change it"
Karl Marx
Karl Marx
-
Oldiebut goodie
- Registered user
- Posts: 7502
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: brake bleed screw size
If it's the rear I would just change the cylinders - that's what I did as they tend to be at the end of their lives anyway unless they have already been changed.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
dave lfc
- Registered user
- Posts: 372
- Joined: 27 Nov 2010, 12:14
- 80-90 Mem No: 9021
- Location: liverpool
Re: brake bleed screw size
yes its the rear,are these easy to do anything to look out for,cheers dave
its better to burn out than to fade away 1.9 dg petrol transporter1988
-
Oldiebut goodie
- Registered user
- Posts: 7502
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: brake bleed screw size
It depends on the condition of the brake pipe really - it is a good excuse to get everything in good order in there - springs, shoes etc.
Have a read of the Wiki https://club8090.co.uk/wiki/Br ... _servicing
Have a read of the Wiki https://club8090.co.uk/wiki/Br ... _servicing
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
jamesc76
- Registered user
- Posts: 6241
- Joined: 14 Oct 2005, 14:42
- 80-90 Mem No: 1186
- Location: Nottingham
- Contact:
Re: brake bleed screw size
£5 for the bleed nipple! Wow I can get need cylinders ( rear) for less than that, might buy a load and sell on the bleed nipples!
DJ at Dubdayz Summerfest
Now cutting about in an LT35 MWB
Now cutting about in an LT35 MWB
-
Oldiebut goodie
- Registered user
- Posts: 7502
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: brake bleed screw size
I thought that was the price of the stud extractor.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
-
ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Re: brake bleed screw size
In an emergency you can get away with bleeding via the pipe nut 
PlusGas is your friend here.
PlusGas is your friend here.
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here