After taking 2 plugs our neither of which got warm when I tested them, thought Id change them all, I think the new fuel filter will help if and when I do get it started, as the old one was packed with crap.
Just don't know how to get this pesky plug out.
The dirty fuel filter would account for the rough running then. Are you struggling with the plugs under the pump, I found taking the fuel pipes off gave me a bit more room?
I have removed the fuel lines, havent tried to remove the one under the pump yet, struggling with the one nearest the back of the van, nearest the pully's, it's rounded off.
Undo the banjo on the pump for the return fuel line and get someone to turn the key - fuel will flood everywhere if all is well. That's also a really good way of bleeding the fuel system.
Did you check there was 12v at the solenoid like Rob suggested?
Can't get mole grips in, will try and get the other one instead, I don't have a multi-meter, but I did turn ignition on and take the wire off and put back on, it did click so am hoping it's ok.
Will get some new plugs in it tomorrow and see what happens.
Ok, new plugs in eventually, and it works!!!!
Hooorrraaayyy!!!!
That and the new filter seems to have done the trick,made it to work, fingers crossed it gets me home.