2.1mv poor idle

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
shakey
Registered user
Posts: 38
Joined: 21 Feb 2008, 15:55
80-90 Mem No: 4811
Location: Brighton

2.1mv poor idle

Post by shakey »

2.1mv engine on syncro has poor idle on start up when engine is cold, Once the engine has warmed up it runs really well. Any ideas, temp2 sender? lamba sensor? very grateful for any ideas.
club member:4811

California Dreamin
Registered user
Posts: 2673
Joined: 03 Apr 2007, 12:54
80-90 Mem No: 8386
Location: Nottingham

Re: 2.1mv poor idle

Post by California Dreamin »

Same as mine matey.....seems to over choke and no evidence fast idle..everything rights itself after 2-3 minutes.
My observations:
I think perhaps the idle stabilization valve that should compensate at this time doesn't work so well, probably all gummed up inside.
And
Well....maybe we are expecting a little too much from an old style warm up system....afterall, this wasn't much after mechanical stepped 'bi-metalic' choke mechanisms.
We have all become very used to seamless cold start to warm running cycles in modern cars....the MV is now well over 20 years old and whilst very advanced in it's day, there was always a very pronounced difference between cold and warm running.

Martin
1989 California 2.1MV

Locked