How heavy is ....

[syncropaddy]

.. a single Mefro 6x15 wheel without a tyre

.. an AAZ engine with all its ancillaries

[Syncrobaz]

E=MC x2 Simple

[syncropaddy]

E=MC² is simple .....

[jebiga41]

A) heavy
B)a lot heavier

[Syncrobaz]

I kant reed n I knt rite bt I i kan dribe a TRATTER

[silverbullet]

Andrew, here's a half-sensible idea: google "vw industrial diesel engine specifications" or variations on that theme, might just throw up a spec sheet for an AHU engine (if that's the right code?) which won't be far off.

As for the Mefro, don't they have a website? Must have published specs too

[silverbullet]

Here's a start...googled "vw industrial diesel engines"
http://www.haywood-sullivan.com/vanagon ... ecs_en.pdf" onclick="window.open(this.href);return false;
Page 6, approximate weight 135 kg dry.

[syncropaddy]

As for the Mefro, don't they have a website? Must have published specs too

Yup did that a while ago. They make a lot of wheels ..... nearly 23 million last year. They give all sorts of specs but dont mention the actual weight of a wheel.

I Wiki'd the VW engines a while ago and weight wasnt mentioned so thanks for the info. I bought an engine stand from Seeley as they were on half price offer and its rated to 350kgs. It is struggling under the weight of a complete AAZ

[silverbullet]

We've got a Draper ES 450 in the workshop, rated at 450kg, but it's as good as the size of the fixings for the engine/bellhousing. It regularly gets XK twin-cams and all-iron pushrod 6 cylinder engines hung on it (from just 4 x 5/16" bsf studs in the latter case)
It does droop a bit when the big lumps go together but (touch wood) it's always been ok.
A little VW diesel 4-pot shouldn't be distressing any engine stand...is it made from woven chinese noodles?

[Sebastian S]

Here's a post on TheSamba stating the weight of a Mefro 15" to 24.5lbs ≈ 11,1kg.

[syncropaddy]

A little VW diesel 4-pot shouldn't be distressing any engine stand...is it made from woven chinese noodles?

It probably is made from Chinese noodles but as long as it will hold an inline 6 Mercedes engine I dont care!

Thanks Sebastian for the link

[syncropaddy]

Here's a post on TheSamba stating the weight of a Mefro 15" to 24.5lbs ≈ 11,1kg.

The Mercedes W126 wheels I got recently (A126 400 28 02) 7x15 ET25 H2 weigh in at 20lbs

[silverbullet]

as long as it will hold an inline 6 Mercedes engine I dont care!

350 kg is a lot of engine in anyone's money! I know I often use Jag engines for weight comparisons, but a V12 with all it's clothes on struggles to make 300kg.
There's no way a Merc 300D (?) gets close to that so you should have plenty of safety margin.
Having said all that, I'd rather have a stand with a pair of wheels at each end, not a tripod like the lighter Sealey ones...they look like they have the potential to hurt someone with a long engine bolted up, especially when you have to turn it over