T25 replacing plastic sliding door hinge
Moderators: User administrators, Moderators
T25 replacing plastic sliding door hinge
Can anyone tell me how or where to replace the plastic hinge on the sliding door ??
Re: T25 replacing plastic sliding door hinge
Plastic hinge????
Do you mean the hinge on the middle runner rail? What year is your van?
Do you mean the hinge on the middle runner rail? What year is your van?
Re: T25 replacing plastic sliding door hinge
Yip the runner it's dropped about 2 mm so it ain't lining up ? Van is an 82 sliding door offside.
Re: T25 replacing plastic sliding door hinge
Post up some pictures if you can. Remove the side cover. Two screws and gentle tap up should get it off.
https://club8090.co.uk/wiki/Mi ... g_pictures" onclick="window.open(this.href);return false;
In the meantime here's some pictures of my early sliding door hinge.
http://s1133.photobucket.com/albums/m58 ... oor_Hinge/" onclick="window.open(this.href);return false;
The problem you describe sounds like the bearing may have split. New bearings can be purchased at
http://www.brickwerks.co.uk/shop?page=s ... ory_id=136" onclick="window.open(this.href);return false;
Also, I doubt it's contributing to your problem, but you can get new a new nylon guide from Justkampers
http://www.justkampers.com/shop/nylon-g ... 11271.html" onclick="window.open(this.href);return false;
The original nylon guide will probably be held on my a rivet, you need to grind off the tail and knock it out. The new guide block will then bolt on with the bolt supplied by JK.
https://club8090.co.uk/wiki/Mi ... g_pictures" onclick="window.open(this.href);return false;
In the meantime here's some pictures of my early sliding door hinge.
http://s1133.photobucket.com/albums/m58 ... oor_Hinge/" onclick="window.open(this.href);return false;
The problem you describe sounds like the bearing may have split. New bearings can be purchased at
http://www.brickwerks.co.uk/shop?page=s ... ory_id=136" onclick="window.open(this.href);return false;
Also, I doubt it's contributing to your problem, but you can get new a new nylon guide from Justkampers
http://www.justkampers.com/shop/nylon-g ... 11271.html" onclick="window.open(this.href);return false;
The original nylon guide will probably be held on my a rivet, you need to grind off the tail and knock it out. The new guide block will then bolt on with the bolt supplied by JK.