Running out of time before going to coney farm so quick advice please.
How do you change the power steering belt on a JX? Doesn't look obvious.
Thanks
Quick advice please
Moderators: User administrators, Moderators
- ninja.turtle007
- Registered user
- Posts: 2234
- Joined: 04 Jun 2009, 16:07
- 80-90 Mem No: 7278
- Location: Surrey
Quick advice please
Full time Explorer http://www.resfeber.co.uk
- lloydy
- Registered user
- Posts: 8015
- Joined: 24 Nov 2009, 17:54
- 80-90 Mem No: 5262
- Location: cheam surrey
Re: Quick advice please
Got to do mine sometime
To me it looks like you need to drop the back box, then 3 bolts holding the pulley together at the pump end. Thats how i was planning to do it any way.
I wouldn't worry to much, mines not that heavy without it attached

To me it looks like you need to drop the back box, then 3 bolts holding the pulley together at the pump end. Thats how i was planning to do it any way.
I wouldn't worry to much, mines not that heavy without it attached
Time is a drug. Too much of it kills you
- syncroandy
- Trader
- Posts: 1919
- Joined: 18 Oct 2005, 18:15
- 80-90 Mem No: 851
- Location: North Lancs. UK
- Contact:
Re: Quick advice please
Isn't there an adjusting screw like on a Golf, not looked at the T3 setup maybe it differs ?
Syncrosport (taking a break as of summer 2024)
Volkswagen Transporter, reloaded.
252 GC5 EJ25 AAN L90D
Volkswagen Transporter, reloaded.
252 GC5 EJ25 AAN L90D
Re: Quick advice please
syncroandy wrote:Isn't there an adjusting screw like on a Golf, not looked at the T3 setup maybe it differs ?
Sure is ! As you are looking at the pump from the back of the vehicle its at the bottom of the pump to the LHS. Not a whole lot of adjustment on it so you may need to take the bolt out to get your belt on. It is a lot easier to do with the exhaust off but you can do it with it on

- ninja.turtle007
- Registered user
- Posts: 2234
- Joined: 04 Jun 2009, 16:07
- 80-90 Mem No: 7278
- Location: Surrey
Re: Quick advice please
Cheers guys, I have a fiddle in the morning after I put the front bash plate back on.
Thanks
Thanks
Full time Explorer http://www.resfeber.co.uk