Help..

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
Novice in need
Registered user
Posts: 87
Joined: 26 Nov 2010, 11:22
80-90 Mem No: 9010
Location: Bedfordshire

Help..

Post by Novice in need »

Hi all
Iv been overheating even thou thermo has been changed the dalek cap also ... unfortunatelly i lost my brother lastnight and desperatelly need the use of the van.

Basically there is steam coming from under the thermo housing it starts to occur strait away after starting even thou it stopped for a while so i went for short drive and it appeared ok but then started again (maybe cos i had the heater on it took longer to heat up).

Any ideas would be very much appreciated !
I have a 1.9 DG Petrol Watercooled Panel Van 1990 ... that im starting to believe has issues!!!!

User avatar
Gandalf
Registered user
Posts: 591
Joined: 07 Oct 2009, 18:52
80-90 Mem No: 7510
Location: Southampton

Re: Help..

Post by Gandalf »

Sorry to hear of your loss.

The only thing I can think of is that you may have van air lock in the system? Have you bled it? There's a thread by Baxter over on Brickyard - I'll see if I can find it and post the link.
1989 California Pop Top.

User avatar
Gandalf
Registered user
Posts: 591
Joined: 07 Oct 2009, 18:52
80-90 Mem No: 7510
Location: Southampton

Re: Help..

Post by Gandalf »

Here you go

http://www.brick-yard.co.uk/forum/bleed ... 29710.html
1989 California Pop Top.

Novice in need
Registered user
Posts: 87
Joined: 26 Nov 2010, 11:22
80-90 Mem No: 9010
Location: Bedfordshire

Re: Help..

Post by Novice in need »

Hi and thank you, il re bleed - i had bled it but il try anything -i just wondered if there is a gasket of sorts in that area that could split etc with the pressure!
I have a 1.9 DG Petrol Watercooled Panel Van 1990 ... that im starting to believe has issues!!!!

User avatar
1664
Registered user
Posts: 8746
Joined: 30 Mar 2006, 15:20
80-90 Mem No: 3299
Location: Coventry Member

Re: Help..

Post by 1664 »

I'm really sorry to hear of your loss. Can't any friends loan you a car for a brief period?
Vorsprung Durch Technik my ar$e!

Novice in need
Registered user
Posts: 87
Joined: 26 Nov 2010, 11:22
80-90 Mem No: 9010
Location: Bedfordshire

Re: Help..

Post by Novice in need »

No i dont have the ability to borrow a car atm plus it would be too much to ask considering that there is going to be alot to organise..which i want to do as much as i can so that it isnt all left to my mother to do.

Its ok il manage
I have a 1.9 DG Petrol Watercooled Panel Van 1990 ... that im starting to believe has issues!!!!

User avatar
kevtherev
Registered user
Posts: 18832
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Re: Help..

Post by kevtherev »

Novice in need wrote: Basically there is steam coming from under the thermo housing it starts to occur strait away after starting

The plastic housing has a paper gasket to the head. I use Hylomar sealer for this housing.
The plastic housing is susceptible to splitting if the flange bolts are over tightened.
The plastic top will seep coolant if it isn't tightened to the correct torque (again I use hylomar)
There is a split pipe
there is a loose pipe clip
steam will appear because the exhaust header is directly below it.

My condolence for your loss, Our thoughts are with you at this difficult time
AGG 2.0L 8V. (Golf GTi MkIII)

User avatar
Nicola&Tony
Registered user
Posts: 2674
Joined: 01 Nov 2006, 18:18
80-90 Mem No: 3095
Location: Wallsend, Tyne & Wear

Re: Help..

Post by Nicola&Tony »

So if I've read it right, Kev is saying that steam is being produced straight away after starting the engine (i.e. the engine hasn't been running long enough to overheat), because something is leaking water onto the exhaust header and the most likely culprits to be leaking are, the thermostat housing, or a damaged pipe or loose clip in that area?

Tony
Looking for: window apertures for side windows, at the back of the van

T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!

LT31; 1993; RHD; 2.4L petrol; high-top; diy camper project.

Novice in need
Registered user
Posts: 87
Joined: 26 Nov 2010, 11:22
80-90 Mem No: 9010
Location: Bedfordshire

Re: Help..

Post by Novice in need »

Thanks everyone much appreciated il check it all out ....
I have a 1.9 DG Petrol Watercooled Panel Van 1990 ... that im starting to believe has issues!!!!

Locked