Dear all
The engine in my 1986 T25 died on the very last day of a 4000-mile grand tour of Europe.
My mechanic has given me a good price for putting in a new engine. However he needs to know the relevant engine code in order to buy in another suitable engine.
The engine code on the current unit has been filed off for some reason (can anyone suggest why that might be, btw?), so we don't know what code to look for.
The current engine is not the original. The mechanic thinks it is from a Golf. On the registration document it says it is 1600 cc however another mechanic thinks it is 1.9. The engine code is not written on the registration doc btw.
Looking at the wiki attached to this site, that would seem to suggest that engine code 1Y is a safe bet... Or could we choose from any of the engine codes on this list?
Any help very much appreciated!
Gus
engine code needed
Moderators: User administrators, Moderators
- jamesc76
- Registered user
- Posts: 6241
- Joined: 14 Oct 2005, 14:42
- 80-90 Mem No: 1186
- Location: Nottingham
- Contact:
Re: engine code needed
ermmmm is it a derv one then?
DJ at Dubdayz Summerfest
Now cutting about in an LT35 MWB
Now cutting about in an LT35 MWB
- Aidan
- Trader
- Posts: 6992
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: engine code needed
if it's diesel then the capacity is cast on the block, ie 1.6 or 1.9 about several inches high on the nearside somewhere that'll be a start
if the pump part numbers cans be read off, the vw and or bosch ones that'll be a guide
turbo or non turbo ? if turbo what type of turbo
pictures will help there's them that can recognise pumps and manifolds by sight
if the pump part numbers cans be read off, the vw and or bosch ones that'll be a guide
turbo or non turbo ? if turbo what type of turbo
pictures will help there's them that can recognise pumps and manifolds by sight
Re: engine code needed
Many thanks for responses.
I'm not sure if it is a 'derv' engine - not familiar with this term - how can I tell?
Here are a couple of pictures - maybe someone can tell me what code this engine is, just by looking at it? The close-up picture shows where the code was, before it was filed off
Cheers
Gus
P.S. pretty sure it's non-turbo.
I'm not sure if it is a 'derv' engine - not familiar with this term - how can I tell?
Here are a couple of pictures - maybe someone can tell me what code this engine is, just by looking at it? The close-up picture shows where the code was, before it was filed off
Cheers
Gus
P.S. pretty sure it's non-turbo.
- Aidan
- Trader
- Posts: 6992
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: engine code needed
yes it's diesel (derv) and that's not where the engine number was stamped, it's stamped on the block underneath that big rubber hose above the oil cooler below number 3 injector
Re: engine code needed
Thanks for that, I'll have another look... can't believe my garage wasn't able to find - doesn't bode well for the job... Also can't believe I forgot to say it was diesel in my original posting! 

- PC52
- Registered user
- Posts: 372
- Joined: 21 Jul 2006, 15:25
- 80-90 Mem No: 3428
- Location: Northants. Syncronaut: 96
Re: engine code needed
That is Non-turbo 1.6 Diesel v. early one
AAZ it - well if you can find a lump that is!
AAZ it - well if you can find a lump that is!
1.9 TDI Syncro Multivan
1.9 TDI Doka project in progress
1.9 TDI Doka project in progress
Re: engine code needed
Many thanks - I will look for an AAZ then.
Impressed that you were able to identify the engine by sight!
Cheers
Impressed that you were able to identify the engine by sight!
Cheers