jx motor

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
macalfie
Registered user
Posts: 65
Joined: 30 Mar 2009, 12:44
80-90 Mem No: 7981
Location: wirral

jx motor

Post by macalfie »

Hi all had a new head put on my jx engine now it smokes a lot when you rev it but none when its ticking over does it sound like the turbo . any ideas

Fritz
Registered user
Posts: 1628
Joined: 17 Jul 2006, 22:51
80-90 Mem No: 380
Location: Ormskirk, Lancashire

Re: jx motor

Post by Fritz »

New head ? OR,,,,,,,,,,,,,,,,,,,,,,, brand new second hand ?

And did you check/replace the valves and the stem oil seals before fitting it ?


Regards


Fritz,,,,,,,,,,, :cry:
One day you will find me,,
Driving in my Camper,
With a Surf and Paisley wrap on both sides....

macalfie
Registered user
Posts: 65
Joined: 30 Mar 2009, 12:44
80-90 Mem No: 7981
Location: wirral

Re: jx motor

Post by macalfie »

Hi not sure if it was new or reconed says new on the reciept but i know my old head was used as parts to rebuild it using new bits when needed cheers

macalfie
Registered user
Posts: 65
Joined: 30 Mar 2009, 12:44
80-90 Mem No: 7981
Location: wirral

Re: jx motor

Post by macalfie »

its also spitting oil out of the exhaust

Grumpy Midget

Re: jx motor

Post by Grumpy Midget »

macalfie wrote:Hi all had a new head put on my jx engine now it smokes a lot when you rev it but none when its ticking over does it sound like the turbo . any ideas

Check the oil return pipe (Turbo to Sump) common fault pipe only needs a slight blockage of carbon or crud, then restricts flow as its only gravity fall, other symptom if it does smoke alot when you rev it on tickover, if its thick black smoke, then Oil seals in the Turbo are shot.
Repair cost for a strip down, clean/decoke/re-fit new seals, + rebuild. Your looking at £250 + vat

Locked