Exhaust Mounting Question

[JW1]

I have a T25 Vanagon Westfalia 1991 1.6 Turbo Diesel LHD.

The exhaust fitted look to have a cat converter.

I am struggling to mount the exhaust properly. When I got the van the exhaust was already on it, however there were no mounting brackets fixed to the exhaust. I have been to GSF and bought 2 rubber mounts however there seems to be 2 other brackets required to fit properly. Can anyone send some pictures of how to mount the exhaust and which brackets I need.

[JW1]

I have the drivers side, however looking for passenger side photos of bracket and where I can get from please?

[JW1]

In this picture (thanks for who's ever thread this came from) I need one of the brackets (the rusty one) that are to the left in this photo. I also need to know if it connects directly to the exhaust or onto another rubber mount then to the exhaust?

Does anyone have a picture of the opposite side mounting brackets. I have both the brackets but need to know how they connect back together? Does this side also use 2 mounting rubbers or just one etc etc.

Please help.

[JW1]

Can anyone tell me if the rusty part with the 2 silver nuts connected is the actual exhaust or a piece that connects to the exhaust?

[kevtherev]

can you see the part here?

click to enlarge the picture

[kevtherev]

Broken Part is VW Part No. 068 251 370

[JW1]

Kevtherev your a star. Thanks a million. The part number i require is 033251375 The Halteblech. Thanks for the screen shot of the web site I think that site will come in handy in the future. Once again

[kevtherev]

Try VW?

or second hand

Number 28 is a "retaining panel" VW Part No 033 251 375 for a 1991 JX 1.6

[Rozzo]

Try VW?

or second hand

Number 28 is a "retaining panel" VW Part No 033 251 375 for a 1991 JX 1.6

or some plate and a hammer, a drill and a big box of swearwords

[JW1]

Part ordered. Collect tomorrow. Thanks again.