radius arm fixings spec?

[sharpmz]

I'm in the process of replacing the radius arm bushes and will need to replace the big nut at the front and the smaller 3 bolts that attach it to the other end (sorry for the lack of tech but new and not got the haynes bible with me)!

All is going well but planned to get said kit today on way home from work and have forgotten to bring the old ones with me.
Anyone know what spec is needed??

Thanks for any help.

[Steve T]

sharpmz

Try this link https://club8090.co.uk/wiki/St ... and_bushes" onclick="window.open(this.href);return false;

and this found in club stuff downloads http://www.club80-90.co.uk/pages/downlo ... 20Susp.pdf" onclick="window.open(this.href);return false;

might have the info you need, it's from the wiki
Steve

[sharpmz]

I had a look earlier and it gives the info on everything but the bolt sizes.

Had all of the bushes and spacers sent through and all ok but just need the nuts and bolts??

[Steve T]

Yes, see the problem had a look at the vagcat site http://www.vagcat.com/epc/cat/vw/T2/1983/4/52/57737/" onclick="window.open(this.href);return false; no sizes there either, but with part number you would get what you need........perhaps asking VW to provide sizes

Steve

[sharpmz]

Ta very much steve, i'll try VW.

[syncrosimon]

M18 x 1.5 self locking for the outside ones.

I think i tried buying those, and were no longer available. Probably my memory though.

Phone up VW and ask for parts then check availability and price.

N 10209005

These look like the inner ones, could use two together as the locking one, that would mean you need 6. Bit expensive still.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %26ps%3D10" onclick="window.open(this.href);return false;