Fridge Not working and bodywork

The Tardis factor (interiors , awnings, roofs etc)

Moderators: User administrators, Moderators

Locked
Crumbly
Registered user
Posts: 5
Joined: 26 Sep 2007, 12:38
80-90 Mem No: 4163
Location: Brighton

Fridge Not working and bodywork

Post by Crumbly »

Hi out there.
Having never had any problems with my fridge the 12volt system just never worked at all on our holiday this week. On touring it didn't cool and when on site it still didn't cool the fridge.
I tested it on the gas and it worked fine using that, but haven't had a chance to check out on mains yet.
I would really appreciate some help or the name of someone near Brighton who could look at it for me.
I also need someone in this area to take a look at the increasing rust damage to my van so, again, any advice/recommendations would be great.
Cheers
Crumbly :?
4163

jason k
Registered user
Posts: 938
Joined: 13 Nov 2005, 09:35
80-90 Mem No: 1959
Location: aberdare south wales

Re: Fridge Not working and bodywork

Post by jason k »

12v wouldnt cool on site as its isolated when the motor stops to prevent you from killing your battery in about an hour!!

on site use mains or gas :ok
98 Westfalia James Cook

Crumbly
Registered user
Posts: 5
Joined: 26 Sep 2007, 12:38
80-90 Mem No: 4163
Location: Brighton

Re: Fridge Not working and bodywork

Post by Crumbly »

Thanks for getting back to me. I do put the fridge to gas on site, my problem is that we drove for 8 hours through France with the 3 way set to 12v battery - Zig to "Touring" and there was no drop in temp at all. Tested it on gas on arrival - that was fine and cooled very quickly, so it seems to be a 12v issue.
Looking at other forums there seems to be talk of in-line fuses but where would I find that in my 1989 Komet?
Thanks
4163

User avatar
1664
Registered user
Posts: 8746
Joined: 30 Mar 2006, 15:20
80-90 Mem No: 3299
Location: Coventry Member

Re: Fridge Not working and bodywork

Post by 1664 »

The 12v fridge wiring is independant and doesn't go via the Zig unit. The fuse and relay are in the cupboard to the left of the fridge at the bottom. You need to remove the shelf for access and then you will see this
Image

It looks like the centre will just slide out but it's VERY stiff so its simpler to remove one sides screws. Then you'll see something like this. (You won't see the thick red cable - I put that in)
Image

Ignore the blade fuse - that's for the propex heater. The red fridge relay is fed from one of the in-line cartridge fuse holders on the left.
Vorsprung Durch Technik my ar$e!

User avatar
albertramsbottom
Trader
Posts: 137
Joined: 18 Aug 2008, 08:38
80-90 Mem No: 5813
Location: Lampeter, West Wales
Contact:

Re: Fridge Not working and bodywork

Post by albertramsbottom »

Yes it should be fused. Normally it is very close to the battery but somtimes wired in to the fuse box near the passenger seat

Paul
2ltr 1982 Aircooled

Street Decals
Vinyl FX Graphics
Design, Creation and application of leading edge vinyl graphics.
Vehicle signage, windows, and decals
http://www.streetdecals.co.uk

User avatar
albertramsbottom
Trader
Posts: 137
Joined: 18 Aug 2008, 08:38
80-90 Mem No: 5813
Location: Lampeter, West Wales
Contact:

Re: Fridge Not working and bodywork

Post by albertramsbottom »

1664 wrote:The 12v fridge wiring is independant and doesn't go via the Zig unit. The fuse and relay are in the cupboard to the left of the fridge at the bottom. You need to remove the shelf for access and then you will see this
Image

It looks like the centre will just slide out but it's VERY stiff so its simpler to remove one sides screws. Then you'll see something like this. (You won't see the thick red cable - I put that in)
Image

Ignore the blade fuse - that's for the propex heater. The red fridge relay is fed from one of the in-line cartridge fuse holders on the left.

Sorry missed that your post ignore this
2ltr 1982 Aircooled

Street Decals
Vinyl FX Graphics
Design, Creation and application of leading edge vinyl graphics.
Vehicle signage, windows, and decals
http://www.streetdecals.co.uk

DanO
Registered user
Posts: 105
Joined: 14 Nov 2008, 20:30
80-90 Mem No: 6872
Location: Brighton

Re: Fridge Not working and bodywork

Post by DanO »

Hi Crumbly

There a really helpful old VW garage by the Engineer Pub, it's on Campbell Road doesn't have a name outside, just a set of double doors. They may not be able to help specifically with the fridge but could put you in touch with someone who could I'm sure. At the end of this road, over the the dead end is another VW garage but this one just does bodywork, again really helpful and will look at the van and give you advice etc. I'm sure the numbers are around here somewhere on a post by me, but it's easier to simply go down and chat to them.

Locked