Trying to source a new replacement primary handbrake cable (the one that goes from the lever to the balance bar above the petrol tank), my local agent, just kampers and GSF dont seem to do them any more.
Has anyone any idea of where to obtain a new replacement cable, thanks.
primary handbrakecable!!!!!!!!!!
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 12
- Joined: 04 Jan 2006, 10:35
- 80-90 Mem No: 7650
- Location: Lancashire/W Yorks border
primary handbrakecable!!!!!!!!!!
1990 westy atlantic 1.6 td (jx) high roof
1988 autosleper trident 1.9 (dg) high roof
1988 autosleper trident 1.9 (dg) high roof
-
- Registered user
- Posts: 1628
- Joined: 17 Jul 2006, 22:51
- 80-90 Mem No: 380
- Location: Ormskirk, Lancashire
Re: primary handbrakecable!!!!!!!!!!
You are not going to get one 'just like that' as Eric Morecambe used to say.......
YOUR options are to find a useable 2 nd hand one/ fix the one you have, OR wait till someone finds a similar cable that can be adapted to replace the origonal item.
( usually taken from another model)
Regards
Fritz,,,,,,,,,,
YOUR options are to find a useable 2 nd hand one/ fix the one you have, OR wait till someone finds a similar cable that can be adapted to replace the origonal item.
( usually taken from another model)
Regards
Fritz,,,,,,,,,,
One day you will find me,,
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
- Aidan
- Trader
- Posts: 7128
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: primary handbrakecable!!!!!!!!!!
Brickie is having them remanufactured due soon
-
- Trader
- Posts: 3151
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
Re: primary handbrakecable!!!!!!!!!!
They are obsolete from VW
GSF no longer sell them.
The people who made them for VW, and the aftermarket have lost their supply of the small plastic guide that fits the cable, so basically no one makes them as they can't buy in this guide
However, I have one away for copying at the moment, you will have to remove the plastic guide and rubber boot from your old cable and fit them to your new one but they should be along fairly soon hopefully.
it's a known issue, hopefully I should have a long term solution.
GSF no longer sell them.
The people who made them for VW, and the aftermarket have lost their supply of the small plastic guide that fits the cable, so basically no one makes them as they can't buy in this guide
However, I have one away for copying at the moment, you will have to remove the plastic guide and rubber boot from your old cable and fit them to your new one but they should be along fairly soon hopefully.
it's a known issue, hopefully I should have a long term solution.
Re: primary handbrakecable!!!!!!!!!!
fritz.it was tommy cooper..
You are not going to get one 'just like that' as Eric Morecambe used to say....
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
- Registered user
- Posts: 12
- Joined: 04 Jan 2006, 10:35
- 80-90 Mem No: 7650
- Location: Lancashire/W Yorks border
Re: primary handbrakecable!!!!!!!!!!
Thanks guy`s, have now welded a threaded bar to the end that has rotted away!!!!!!!!. I can now adjust it at the balance bar now. The metal cable (the bit you cant see on top of the tank) looks like it will last a little longer.
The tank however wouldnt and neither the clutch cable, all now been replaced. The unions on the plastic pipe to the slave cylinder (plastic pipe and unions again obselete so i`ve been told) rotted away had a nightmare trying to obtain replacements, ended up having to use a flexible pipe from an earlier model.
Typical you start one job and more and more little!!???!! jobs crop up on the way!!!!!.
BTW anyone know if the plastic pipe and the unions attached to the slave cylinder are available from anywhere.
Please put me down for a new handbrake cable Simon when they arrive.
The tank however wouldnt and neither the clutch cable, all now been replaced. The unions on the plastic pipe to the slave cylinder (plastic pipe and unions again obselete so i`ve been told) rotted away had a nightmare trying to obtain replacements, ended up having to use a flexible pipe from an earlier model.
Typical you start one job and more and more little!!???!! jobs crop up on the way!!!!!.
BTW anyone know if the plastic pipe and the unions attached to the slave cylinder are available from anywhere.
Please put me down for a new handbrake cable Simon when they arrive.
1990 westy atlantic 1.6 td (jx) high roof
1988 autosleper trident 1.9 (dg) high roof
1988 autosleper trident 1.9 (dg) high roof