Ay up Folks,
It's that time of year and we're going 'posh' this year, (mains hook-up). I got a Zig CF8 unit and I'm plumbing it in. The three 10Amp circuits all show that the appliances (water pump, lights,etc) have the earth wire returning to the Zig unit.
Is this absolutely necessary ? It would be a lot easier to locally ground the appliance rather than running an earth wire back to the zig. The chassis is negatively eathed so what's the difference?
Any advice welcome, thanks.
Yozza
Zig CF8 Earthing? Homebrew Camper
Moderators: User administrators, Moderators
- Yozza
- Registered user
- Posts: 45
- Joined: 15 Oct 2008, 19:28
- 80-90 Mem No: 6195
- Location: Stoke-on-Trent
Zig CF8 Earthing? Homebrew Camper
T25 '90 2.1i 16" Doka
JCB 3C MkII
Thwaites 6000
JCB 3C MkII
Thwaites 6000
- Oldiebut goodie
- Registered user
- Posts: 7497
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Zig CF8 Earthing? Homebrew Camper
It's because they were designed for caravans that don't have the readily available earthing route via a chassis. Just make sure you have the unit earthed.
When I fitted one though it was just as easy to run twin cable as a single one and saved having several earthing points to worry about.
When I fitted one though it was just as easy to run twin cable as a single one and saved having several earthing points to worry about.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- Yozza
- Registered user
- Posts: 45
- Joined: 15 Oct 2008, 19:28
- 80-90 Mem No: 6195
- Location: Stoke-on-Trent
Re: Zig CF8 Earthing? Homebrew Camper
Thanks Oldie, that makes sense.
T25 '90 2.1i 16" Doka
JCB 3C MkII
Thwaites 6000
JCB 3C MkII
Thwaites 6000